GASKET 2014331 - Caterpillar

Illustration 1 g06271351
Table 1
Item Qty Part Specification Description
1 1 6E-0804 Bushing Bore before assembly is 90.210 0.025 mm (3.5516 0.0010 inch).
Installation depth is 8.5 0.5 mm (0.34 0.02 inch).
2 1 495-8200 Ring As Lubricate the inside diameter and the outside diameter of the seal assembly with clean grease.
3 1 266-3491 Head Before assembly, lubricate the threads with clean grease.
Bore of the head over three lands (D3) is 70.53 0.03 mm (2.777 0.001 inch).
4 1 3G-5285 Bushing Bore before assembly is 70.102 0.020 mm (2.7599 0.0001 inch).
Installation depth is 9.25 0.50 mm (0.364 0.020 inch).
5 1 319-8094 Piston Before assembly, lubricate the threads.
Torque to 600 100 N m (442 74 lb ft).
D1 1 330-1144 Hydraulic Cylinder Bore is 130.1 0.1 mm (5.12 0.01 inch).
D2 1 330-1142 Hydraulic Cylinder Rod As Diameter is 69.930 0.038 mm (2.7531 0.0015 inch).
6 1 167-2235 Buffer Seal As Lubricate sealing lip lightly with the lubricant that is being sealed.
7 1 167-2299 U-Cup Seal Lubricate sealing lip lightly with the lubricant that is being sealed.
8 1 278-2324 Wiper Seal Lubricate sealing lip lightly with the lubricant that is being sealed.
9 - - Before assembly, apply green Loctite 648 to the wiper seal groove.
10 1 9X-6611 Socket Setscrew Before assembly, apply Loctite 243 to the threads.