GASKET KIT 2129469 - Caterpillar

Table 1
Dealer Service Tool     Sales Model    
305-3013 Piston Installation Sleeve     24H
824G
824G Series II
824H
834G
834H
825G
825G Series II
825H
826G
826G Series II
826H
836G
836H
980G
980G Series II
980H
988G
988H
R2900G
AD30    
306-4092 Piston Installation Sleeve     D9R
D9T    
306-4093 Piston Installation Sleeve     D10R
D10T    The Procedure for Installing the Piston Seal Assembly
Follow steps 1 through 6 for the correct assembly procedure.
Place the piston on a flat work surface. The flange of the piston should be placed toward the work surface.
Assemble the outer seal ring to the groove on the outer diameter of the piston.
Assemble the inner seal ring to the groove on the inner diameter of the piston.
Roll the seals with a dowel in order to seat the seals in the grooves.Note: Be careful not to cut or pinch the seal on any of the slots in the piston.
Lubricate the piston bore of the housing and lubricate the seals on the piston with clean transmission oil. Ensure that the chamfers on the housing and piston seals are covered with lubricant.
Install the correct sleeve onto the housing. Refer to the tool operating manual.
Install the piston into the housing. Ensure that the piston seals are not damaged during the assembly process.