GASKET 2217710 - Caterpillar

TYPICAL ILLUSTRATION(1) 6A7194 Recoil Spring: Length installed ... 22.8 in.(578 mm)Length, assembled for installation ... 20.9 .2 in.(530 5 mm)Free length after test ... 26.0 .2 in.(660 6 mm)Force after installation (approximately ... 22,671 242 lb.(100 770 7320 N)(2) Torque for valve ... 25 5 lb. ft.(35 7 N m)(3) Torque for valve ... 25 5 lb. ft.(35 7 N m)(4) Put 5P3931 Anti-Seize Compound around both ends of the shaft, bearing surface (A) and lockpin (8) before assembly.(5) Rubber toric seals and all surfaces in contact with them must be clean and dry at assembly. Put a thin layer of SAE 30 oil on the contacting surfaces of the metal seals just before installation. Lubricate all other seals at assembly.(6) Torque for stud to pilot (7) ... 590 60 lb. ft.(800 80 N m)(8) Torque, taper lockpin bolt: Initial to seal parts ... 40 lb. ft.(55 N m)then drive lockpin in place and retighten to ... 50 10 lb. ft.(78 14 N m)