GASKET 2345925 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     4    
Illustration 1 g00746275
Use a suitable hoist and lifting slings in order to install main control valve (21). The weight of main control valve is 50 kg (110 lb).
Illustration 2 g00746277
Install three bolts (22) on main control valve (21) .
Illustration 3 g00746273
Left side view
Connect tube assemblies (18) and (19) .
Connect electrical connector (20) .
Illustration 4 g00746272
Right side view
Connect tube assemblies (14) and (15) .
Connect electrical connector (17) .
Install wire tie (16) .
Illustration 5 g00746278
Connect two tube assemblies (11) .
Connect hose assemblies (12) and (13) .
Illustration 6 g00746271
Install bolts (9) and clamps (10) .
Illustration 7 g00746420
Install Tooling (A) to cover (8), as shown.
Attach a suitable hoist and lifting slings to Tooling (A) .
Use the hoist in order to install cover (8). The weight of cover (8) is 70 kg (155 lb).
Illustration 8 g00746418
Install four bolts (7) and the washers.
Illustration 9 g00746417
Install cover (6) .
Install three bolts (5) and the washers.
Illustration 10 g00746416
Install left side cover (4) .
Install eight bolts (3) and the washers. Repeat this procedure for the right side cover.
Install center cover (2) .
Install four bolts (1) and the washers.End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".