GASKET 2442125 - Caterpillar

Quick Disconnect (QD) Conversion
Auxiliary quick disconnects on standard flow compact wheel loader are smaller than standard quick disconnects provided on work tool. Follow the below QD conversion for (2-Hydraulic Lines/8-pin Work Tool Harness). Also refer Special Instruction, SEHS0544, "Installation of ISO to SSL Converter Bracket" for bracket installation procedure.
Illustration 1 g06028345
Before
(A) 161-2560 Dust Cap/ 161-2561 Dust Cap
(B) 153-2996 Fitting As/ 153-2997 Fitting As
(C) 189-5719 Adapter As
Remove dust caps (A), fitting Assemblies (B), and adapter assemblies (C). Refer to Illustration 1.
Illustration 2 g06028348
After
(D) 426-4046 Fitting As
(E) 152-5717 Dust Cap
(F) 426-4044 Fitting As
(G) 152-5718 Dust Cap
Install fitting assembly (D), dust cap (E), fitting assembly (F), and dust cap (G).Rack Back Stops
Order Rack Back Stops through parts or WT-CWL price pages.
Rack Back Stops are required with Certain Work Tools to prevent damage to Tool or Host machine during rack back.
Rack Back Stops limit the amount of rack back available.Work Tool (WT) Conversion Kit
Required on certain Work Tool and Host Machine combinations.
Converts a 5 Hydraulic Lines / 8-pin Work Tool Harness system to a 3 Hydraulic Lines / 14-pin Work Tool Harness system.
Converts a 3 Hydraulic Lines / 14-pin Work Tool Harness system to a 5 Hydraulic Lines / 8-pin Work Tool Harness system.
Work Tool conversion Kits are available in WT-SSL price pages.