GASKET 2759886 - Caterpillar

Transmission Sensors
Illustration 13 g03677398
Pedal steering configuration (If Equipped)
Illustration 14 g03677454
Joystick steering configuration (If Equipped)
The transmission sensors are located in the control lever to the right of the operator seat.Speed Range Switch
Illustration 15 g03677500Speed range switch is located on the transmission joystick to the left of the operator seat.Speed Range Switch
Illustration 16 g03677530The speed range switch is the intermittent three position switch that is located on the console for the transmission lever.Horn Switch
Illustration 17 g03677550
Illustration 18 g03681150The horn switch is the yellow button that is located on the console for the transmission lever.Pump Solenoids
Illustration 19 g03681155The forward and the reverse solenoids for the left side are located on the left pump. The forward and the reverse solenoids for the right side are located on the right pump. The solenoids allow oil to flow to the left side motor and the right side motor.Pump Sensors
Illustration 20 g03677769
Sensors in the foreground of the illustration are forward pressure sensors, sensors in the background of the illustration are reverse pressure sensors.
The pump pressure sensors are located on the right side of the pump. The sensors toward the top side of the pump are in the forward loop. The sensors toward the bottom side of the pump are in the reverse loop.Motor Solenoids
Illustration 21 g03121263The motor solenoids are located on the back of the motors.Track Speed Sensors
Illustration 22 g03121278The track speed sensors are located on the back of the motors.Electronic Control Module
Illustration 23 g03677936The electronic control module is located on the machine right side, in the side access panel from inside the cab. The electronic control module controls all electronic signals from the implement system, including solenoids, sensors, and switches.Backup Alarm
The backup alarm is mounted on the rear of the machine.
Illustration 24 g06250094Backup alarm - The alarm will sound when the lever for the steering and transmission control is in the REVERSE position. The alarm is used to alert people behind the machine that the machine is backing up.