2941769 GASKET Caterpillar parts
320D, 320D FM, 320D GC, 320D L, 320D LN, 323D L, 323D LN, 323D SA
Rating:
Alternative (cross code) number:
CA2941769
294-1769
2941769
CA2941769
294-1769
2941769
Weight: 0.04 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$7.26
02 May 2022
0.1102[0.05] Pounds
US: TakePart
CTP Caterpillar Gasket (2941769)
CTP
CTP
Number on catalog scheme:
1
For full view, you need register
Compatible equipment models: 2941769:
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and tube assemblies. This helps prevent fluid loss, and this helps to keep contaminants from entering the system.
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g01324908
Typical example
Drain fuel filter (4). Refer to Operation and Maintenance Manual, "Fuel System Primary Filter/Water Seperator - Drain".
Disconnect harness assembly (1) from fuel priming pump (2) .
Disconnect the tube assemblies (not shown) from fuel filter base (3) .
Remove bolts (5) and remove fuel filter base (3) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the assembly of the fuel priming pump and the fuel filter base is clean and free from damage. If necessary, replace any components that are damaged.
Illustration 2 g01324908
Typical example
Position fuel filter base (3) on the mounting bracket. Install bolts (5) to the fuel filter base. Tighten the bolts to a torque of 35 N m (26 lb ft).
Connect the tube assemblies for the fuel inlet and the fuel outlet (not shown) to fuel filter base (3) .
If necessary, install a new fuel filter (4) to fuel filter base (3). Refer to Operation and Maintenance Manual, "Fuel System Primary Filter/Water Seperator - Drain".
Connect harness assembly (1) to fuel priming pump (2) .
Turn the fuel supply to the ON position.
Turn the battery disconnect switch to the ON position.
Remove the air from the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and tube assemblies. This helps prevent fluid loss, and this helps to keep contaminants from entering the system.
Turn the fuel supply to the OFF position.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g01324908
Typical example
Drain fuel filter (4). Refer to Operation and Maintenance Manual, "Fuel System Primary Filter/Water Seperator - Drain".
Disconnect harness assembly (1) from fuel priming pump (2) .
Disconnect the tube assemblies (not shown) from fuel filter base (3) .
Remove bolts (5) and remove fuel filter base (3) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the assembly of the fuel priming pump and the fuel filter base is clean and free from damage. If necessary, replace any components that are damaged.
Illustration 2 g01324908
Typical example
Position fuel filter base (3) on the mounting bracket. Install bolts (5) to the fuel filter base. Tighten the bolts to a torque of 35 N m (26 lb ft).
Connect the tube assemblies for the fuel inlet and the fuel outlet (not shown) to fuel filter base (3) .
If necessary, install a new fuel filter (4) to fuel filter base (3). Refer to Operation and Maintenance Manual, "Fuel System Primary Filter/Water Seperator - Drain".
Connect harness assembly (1) to fuel priming pump (2) .
Turn the fuel supply to the ON position.
Turn the battery disconnect switch to the ON position.
Remove the air from the fuel system. Refer to Operation and Maintenance Manual, "Fuel System - Prime".
Cat SIS web machinery list:
Parts gasket Caterpillar catalog:
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321C, 321D LCR, 3...
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 313D, 314D CR, 314D LCR, 315D L, 318D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
311D LRR, 312D, 312D L, 314D CR, 314D LCR, 315D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
2505785
GASKET
324D FM, 324D FM LL, 324D L, 325D FM, 325D FM LL, 325D L, 325D MH, 329D L
324D FM, 324D FM LL, 324D L, 325D FM, 325D FM LL, 325D L, 325D MH, 329D L
3330587
GASKET
1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 2590, 511, 521, 522, 532, 541, 541 2, 551, 552, 552 2
1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 2590, 511, 521, 522, 532, 541, 541 2, 551, 552, 552 2
3330585
GASKET
1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 2590, 511, 521, 522, 532, 541, 541 2, 551, 552, 552 2
1190, 1190T, 1290T, 2290, 2390, 2391, 2491, 2590, 511, 521, 522, 532, 541, 541 2, 551, 552, 552 2
3792420
GASKET-FILTER
2470C, 2570C, 2670C, 2864C, 525D, 535D, 545D, 553C, 555D, 563C, 573C, 586C
2470C, 2570C, 2670C, 2864C, 525D, 535D, 545D, 553C, 555D, 563C, 573C, 586C
3542191
GASKET
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 586C
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 586C
4181420
GASKET-END CAP
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 586C
2470C, 2570C, 2670C, 2864C, 553C, 563C, 573C, 586C
2977651
GASKET
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LRR, 320D RR, 321D LCR
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA