GASKET 2F5862 - Caterpillar

Illustration 14 shows the working surface raised (gray dashed line is the previous position and the green line is in the new position).
Illustration 15 g06182300
Working surface offset with vertical offset
Illustration 15 shows the working surface raised (gray dashed line is the previous position) the offset raised (the black dashed line showing the current position of the working surface) to create a surface (the green line is in the new surface definition).Perpendicular Offset
The perpendicular direction in the elevation offset advance options gives the operator to offset perpendicular to the working surface.
Illustration 16 g06280163
Vertical or perpendicular offset menu
Illustration 17 g06280162
Perpendicular with a 15.3 mm (0.05 ft) offset
Illustration 18 g06284622Perpendicular with a 15.3 mm (0.05 ft) offset and a working surface set at a 15.3 mm (0.05 ft).Offset Memories
Offset memories are saved offsets to the design elevation. The offsets saved in the display can be activated as needed and reused.To go to the "Memories" screen, press the "Offset Memories" button (9) found on the elevation offset screen.
Illustration 19 g06288876
Offset memories screen
(13) Memories indicator graphic
(14) Saved memories
(15) Add button
Illustration 20 g06288886
Offset memories screen with a memory selected
(16) Highlighted offset memoryWhen a saved preset distance is selected, the direction of that preset distance is shown in the memories indicator graphic (13). Illustration 20 shows that selected preset distance "Offset 100mm" is 0.100 m (0.3281 ft) below the initial working surface. The memories indicator graphic (13) indicates that "Offset 100mm" is below the working surface.Add Offset Memory
Add offset memory screen enables an operator to create and save new preset offsets to be activated as needed.
Illustration 21 g06288902
Add offset memory
(3) Offset adjustment arrows
(4) Offset positive/negative sign button
(5) Offset value field
(7) Cancel button
(8) Save button
(17) Offset preset memory name field
To open the "Add Offset Memory" screen, press the "Add" button (15).
Enter an offset distance in the offset value field (5). Use either the offset adjustment arrows (3) (in increments of 0.015 m (0.05 ft)) or tap the offset value field (5) and use the pop-up on-screen keyboard to enter directly the desired value. The offset positive/negative sign button (4) can be used to switch the offset between being above (positive) or below (negative) the design surface.
Tap the "Save" button (8) to save the offset.Edit Offset Memory
Existing saved preset offsets can be edited. The name and the offset distance of the saved preset offsets can be updated. A saved preset distance can also be deleted from the display memory.Follow the steps below to edit or delete offset memory:
Illustration 22 g06284623
Offset memories
(18) More button
Tap the "More" button (18) indicated by the three vertical dots in the offset memories menu.
Illustration 23 g06347532
Editing or deleting offset memories
(19) Edit
(20) Delete
Choose "Edit" (19) to change the offset memory or "Delete" (20) to clear the offset memory.
Illustration 24 g06347525
Editing offset memory
(3) Offset adjustment arrows
(4) Offset positive/negative sign button
(5) Offset value field
(7) Cancel button
(8) Save button
(17) Edit offset memory name field
The offset memory may be changed by entering a new value or adjusting the value using the arrow buttons.
When finished editing, press "Save" (8) to complete the change.