2H9158 GASKET Caterpillar parts D337 GASKET
Rating:
Alternative (cross code) number:
CA2H9158
2H-9158
2H9158
CA2H9158
2H-9158
2H9158

Weight: 0.05 pounds 0 kg.
Buy GASKET 2H9158 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,
Compatible equipment models: 2H9158:
MARINE ENGINE D337
Caterpillar
Information:
Start By:a. separation of tracks
Typical Example1. Remove the oil from the final drive housing.2. Remove bolts (1) and locknut (2).
Typical Example3. Remove nut (3) from the sprocket shaft.
Typical Example4. Install tooling (A) as shown. Make sure there is 6.35 mm (.250 in.) clearance between 6F8343 Adapter (5) and sprocket hub (4). Fasten a hoist to tooling (A). Loosen sprocket hub (4) from the sprocket shaft.
Typical Example
Do not remove 6F8343 Adapter (5) or the sprocket hub can fall when the tooling is removed.
5. Remove tooling (A) except for 6F8343 Adapter (5). Fasten a hoist to the sprocket hub as shown. Remove 6F8343 Adapter (5) from the sprocket shaft. Remove sprocket hub (4). The weight is 52 kg (115 lb.). 6. Remove gasket (6) from the sprocket hub.
Typical Example7. Remove outer half of Duo-Cone seal (7) from the sprocket hub. 8. Remove inner half of Duo-Cone seal (8) from the retainer.Install Sprocket Hubs
The rubber seals and all surfaces that make contact with the seals must be clean and dry with no damage to the surface. After installation of the seals, put oil on the contact surfaces of the Duo-Cone seals. See the topic, Installation Of Conventional Duo-Cone Seals, before installing any of the Duo-Cone seals.1. Install the inner half of the Duo-Cone seal in the retainer with tool (B).
Typical Example2. Install the outer half of the Duo-Cone seal in the sprocket hub with tool (B).
Typical Example
The splines in the sprocket hub and shaft must be clean and free from burrs.
3. Fasten a hoist to the sprocket hub. Put sprocket hub (4) in position on the sprocket shaft.
Typical Example4. Install tooling (C) and fasten a hoist. Use tooling (C) to install the sprocket hub on the sprocket shaft with a force of 311 to 355 kN (35 to 40 ton). 5. Use tooling (D) to check the distance from the shoulder of the sprocket shaft to the face of the sprocket hub. The distance must be 3.00 0.8 mm (.118 .03 in.). 6. Install gasket (6).
Typical example7. Install nut (3) that holds the sprocket hub on the sprocket shaft. Tighten the nut to a torque of 334 33 N m (243 24 lb.ft.). 8. Put 7M7260 Liquid Gasket Material between locknut (2) and the sprocket hub face. Install locknut (2). If the bolt holes do not make an alignment with the holes in the sprocket hub, turn nut (3) clockwise only enough to install locknut (2).9. Fill the final drive housing with oil to the correct level. See the Operation And Maintenance Manual.End By:a. connection of tracks
Typical Example1. Remove the oil from the final drive housing.2. Remove bolts (1) and locknut (2).
Typical Example3. Remove nut (3) from the sprocket shaft.
Typical Example4. Install tooling (A) as shown. Make sure there is 6.35 mm (.250 in.) clearance between 6F8343 Adapter (5) and sprocket hub (4). Fasten a hoist to tooling (A). Loosen sprocket hub (4) from the sprocket shaft.
Typical Example
Do not remove 6F8343 Adapter (5) or the sprocket hub can fall when the tooling is removed.
5. Remove tooling (A) except for 6F8343 Adapter (5). Fasten a hoist to the sprocket hub as shown. Remove 6F8343 Adapter (5) from the sprocket shaft. Remove sprocket hub (4). The weight is 52 kg (115 lb.). 6. Remove gasket (6) from the sprocket hub.
Typical Example7. Remove outer half of Duo-Cone seal (7) from the sprocket hub. 8. Remove inner half of Duo-Cone seal (8) from the retainer.Install Sprocket Hubs
The rubber seals and all surfaces that make contact with the seals must be clean and dry with no damage to the surface. After installation of the seals, put oil on the contact surfaces of the Duo-Cone seals. See the topic, Installation Of Conventional Duo-Cone Seals, before installing any of the Duo-Cone seals.1. Install the inner half of the Duo-Cone seal in the retainer with tool (B).
Typical Example2. Install the outer half of the Duo-Cone seal in the sprocket hub with tool (B).
Typical Example
The splines in the sprocket hub and shaft must be clean and free from burrs.
3. Fasten a hoist to the sprocket hub. Put sprocket hub (4) in position on the sprocket shaft.
Typical Example4. Install tooling (C) and fasten a hoist. Use tooling (C) to install the sprocket hub on the sprocket shaft with a force of 311 to 355 kN (35 to 40 ton). 5. Use tooling (D) to check the distance from the shoulder of the sprocket shaft to the face of the sprocket hub. The distance must be 3.00 0.8 mm (.118 .03 in.). 6. Install gasket (6).
Typical example7. Install nut (3) that holds the sprocket hub on the sprocket shaft. Tighten the nut to a torque of 334 33 N m (243 24 lb.ft.). 8. Put 7M7260 Liquid Gasket Material between locknut (2) and the sprocket hub face. Install locknut (2). If the bolt holes do not make an alignment with the holes in the sprocket hub, turn nut (3) clockwise only enough to install locknut (2).9. Fill the final drive housing with oil to the correct level. See the Operation And Maintenance Manual.End By:a. connection of tracks
Caterpillar parts catalog:
Parts gasket Caterpillar catalog:
2A1913
GASKET-PLUG
12E, 12H, 16, 1673C, 1693, 16G, 16H NA, 3304, 3304B, 3306, 3306B, 561B, 621F, 623E, 623F, 627F, 627G, 627H, 627K, 627K LRC, 637D, 637E, 637G, 641, 641B, 650B, 651, 657, 657B, 666, 69D, 769, 769C, 769D...
12E, 12H, 16, 1673C, 1693, 16G, 16H NA, 3304, 3304B, 3306, 3306B, 561B, 621F, 623E, 623F, 627F, 627G, 627H, 627K, 627K LRC, 637D, 637E, 637G, 641, 641B, 650B, 651, 657, 657B, 666, 69D, 769, 769C, 769D...
7F7590
GASKET
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 215, 235, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3...
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 215, 235, 235B, 330, 330 L, 3304, 3304B, 3306, 3306B, 3...
1F3131
GASKET
1673, 594, 955C, 977H, D330A, D333A, D337, D348, D353C, D364, D375D, D379, D379A, D379B, D397D, D398, D398A, D398B, D399, D9E, D9G, D9H, G353D, G379, G398, G399
1673, 594, 955C, 977H, D330A, D333A, D337, D348, D353C, D364, D375D, D379, D379A, D379B, D397D, D398, D398A, D398B, D399, D9E, D9G, D9H, G353D, G379, G398, G399
0L1213
GASKET
3304, 3306, 561B, 621, 621B, 621R, 623, 627B, 631C, 633C, 637D, 641, 641B, 651, 657B, 815, 816, 824B, 826B, 834, 950, 955C, 966C, 977D, 980, 980B, 988, 992, D315, D337, D343, D353C, D364, D375D, D379,...
3304, 3306, 561B, 621, 621B, 621R, 623, 627B, 631C, 633C, 637D, 641, 641B, 651, 657B, 815, 816, 824B, 826B, 834, 950, 955C, 966C, 977D, 980, 980B, 988, 992, D315, D337, D343, D353C, D364, D375D, D379,...
6F9163
GASKET
16, 1673, 1673B, 1676, 3304, 631C, 633C, 641B, 657, 657B, 769, 824, 824B, 825B, 983, D326F, D336, D337, D337F, D343, D348, D353C, D364, D375D, D397D, D7F, D9E, D9G
16, 1673, 1673B, 1676, 3304, 631C, 633C, 641B, 657, 657B, 769, 824, 824B, 825B, 983, D326F, D336, D337, D337F, D343, D348, D353C, D364, D375D, D397D, D7F, D9E, D9G
2A3885
GASKET
12E, 16, 1673, 1693, 583H, 594, 641B, 651, 657, 657B, 666, 769, 772, 824, 834, 955C, 988, D315, D326F, D330A, D337, D342, D343, D346, D348, D353C, D364, D379, D379A, D379B, D397D, D398, D398B, D399, D...
12E, 16, 1673, 1693, 583H, 594, 641B, 651, 657, 657B, 666, 769, 772, 824, 834, 955C, 988, D315, D326F, D330A, D337, D342, D343, D346, D348, D353C, D364, D379, D379A, D379B, D397D, D398, D398B, D399, D...
2B5721
GASKET
12E, 16, 1673, 1673B, 193, 561B, 571G, 572G, 583H, 583K, 594, 594H, 621, 623, 631C, 637, 641, 641B, 650B, 651, 657, 657B, 666, 666B, 824, 824B, 834, 941, 951B, 955C, 955H, 955K, 966C, 977H, 977K, 980,...
12E, 16, 1673, 1673B, 193, 561B, 571G, 572G, 583H, 583K, 594, 594H, 621, 623, 631C, 637, 641, 641B, 650B, 651, 657, 657B, 666, 666B, 824, 824B, 834, 941, 951B, 955C, 955H, 955K, 966C, 977H, 977K, 980,...
2H2519
GASKET
1693, 594, 621, 641, 651, 657, 666, 769, 824, 955C, 980, D315, D320A, D326F, D337, D337F, D342, D342C, D343, D353C, D8H, D9E, D9G, D9H, G342C
1693, 594, 621, 641, 651, 657, 666, 769, 824, 955C, 980, D315, D320A, D326F, D337, D337F, D342, D342C, D343, D353C, D8H, D9E, D9G, D9H, G342C
6F7557
GASKET
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L,...
311, 311B, 311C, 311D LRR, 312, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320, 320 L, 320B, 320B FM LL, 320C, 320C FM, 320C L,...
1A2848
GASKET
12E, 16, 561B, 583H, 621, 651, 666, 824, 834, 955C, 955H, 955K, 977H, 977K, 980, 988, D315, D320A, D337, D342, D342C, D343, D353C, D379, D398, D4D, D8H, D9E, D9G, G342C
12E, 16, 561B, 583H, 621, 651, 666, 824, 834, 955C, 955H, 955K, 977H, 977K, 980, 988, D315, D320A, D337, D342, D342C, D343, D353C, D379, D398, D4D, D8H, D9E, D9G, G342C
9F1479
GASKET
16, 1693, 594, 657, 769, 988, D326F, D337, D337F, D343, D353C, D379, D379A, D9E, D9G, G379
16, 1693, 594, 657, 769, 988, D326F, D337, D337F, D343, D353C, D379, D379A, D9E, D9G, G379
8F6143
GASKET
583H, D326F, D337, D337F, D342, D342C, D343, D353C, D375D, D379, D397D, D8H, D9E, D9G, G342C
583H, D326F, D337, D337F, D342, D342C, D343, D353C, D375D, D379, D397D, D8H, D9E, D9G, G342C
3H7585
GASKET
D337
D337
3H6582
GASKET
D337
D337
1L1289
GASKET
D337
D337
9F7451
GASKET
D337
D337
3H5714
GASKET
D337
D337
8F0911
GASKET
D337
D337
4H0718
GASKET
D326F, D337, D337F
D326F, D337, D337F
8F9946
GASKET
D326F, D337, D337F
D326F, D337, D337F
2H9130
GASKET
D337
D337
2H9098
GASKET
D337
D337
2H9131
GASKET
D337
D337
2H9101
GASKET
D337
D337