GASKET 2H9316 - Caterpillar

Illustration 10 g00954590
Note: Gears (22) and (23) must be removed from the case assembly at the same time.
Remove gear (22) and gear (23) from the case assembly.
Illustration 11 g00954593
Note: Bearing cones (24) must be destroyed in order to remove the cones from the gear.
Remove bearing cones (24) from gear (22) .
Illustration 12 g00960129
Remove bolt (25) and retainer (26) from gear (23) .
Illustration 13 g00954591
Use Tooling (B) and a press in order to remove bearing cone (27) from gear (28) .
Illustration 14 g00954592
Use a suitable press in order to remove bearing cone (29) from gear (28) and from gear (23) .
Illustration 15 g00954857
Remove bearing cups (30) from case (31) .
Illustration 16 g00954859
Bend the tab on washer (33) away from nut (32) .Note: Use a new washer (33) during assembly.
Use Tooling (C) in order to remove nut (32) .
Remove washer (34) .
Illustration 17 g00954860
Attach a suitable lifting device to shaft assembly (35). The weight of the shaft is approximately 39 kg (86 lb).
Remove shaft assembly (35) .
Illustration 18 g00954861
Remove bolts (36) .
Remove gear (37) .
Illustration 19 g00954863
Remove the race and roller bearing (38) from shaft assembly (35) .
Illustration 20 g00954864
Remove bolts (39) and retainer (40) .
Remove cage (41) and shims (42) .
Illustration 21 g00954865
Remove the bearing cone and bearing cup (43) .
Remove spacer (42) .
Remove the bearing cone and bearing cup (44) from cage (41) .
Illustration 22 g00960207
Remove bearing cup (45) from case (31) .
Illustration 23 g00960209
Remove tube assemblies (47) and fittings (46), if necessary.