2M6203 GASKET Caterpillar parts
16, 1693, 631C, 657, 657B, 769, 824, 824B, 825B, 834, 983, 988, D343, G343
Rating:
Alternative (cross code) number:
CA2M6203
2M-6203
2M6203
CA2M6203
2M-6203
2M6203
Weight: 0.07 pounds 0 kg.
GAS ENGINE, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$12.94
20 Jan 2022
US: Florida-Parts-Z
2M6203 - Gasket for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
$7.89
08 Dec 2018
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR GASKET 2M6203 NEW
$6.62
20 Jan 2022
0.1102[0.05] Pounds
US: IronDT
2M6203 Gasket Fits Caterpillar
TCP Warranty
TCP Warranty
Number on catalog scheme:
For full view, you need register
Compatible equipment models: 2M6203:
Information:
Removal Procedure
Start By:
Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove" for the correct procedure.
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The engine should be mounted on a suitable stand and placed in the inverted position.
Illustration 1 g02311154
Remove thrust washer (1) from the cylinder block. Do not remove dowel (2) from the cylinder block unless the dowel is damaged. Note: The thrust washer has one Slots (X).
Illustration 2 g03449856
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully remove camshaft (3) from the cylinder block.
If necessary, remove key (4) from camshaft (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the camshaft and the thrust washer. Inspect the camshaft and the thrust washer for wear and for damage. Refer to Specifications, "Camshaft" for more information. Replace any components that are worn or damaged.
Clean the camshaft bearing in the cylinder block. Inspect the camshaft bearing for wear and for damage. Refer to Specifications, "Camshaft Bearings" for more information. If necessary, replace the camshaft bearing. Refer to Disassembly and Assembly, "Camshaft Bearing - Remove and Install".
Replace all lifters when a new camshaft is installed.
Inspect the lifters for wear and for damage. Refer to Specifications, "Lifter Group" for more information. Replace any lifters that are worn or damaged. Refer to Disassembly and Assembly, "Lifter Group - Remove and install" for the correct procedure.
Illustration 3 g03449856
If necessary, install a new key (4) into camshaft (3).
Lubricate the bearing surfaces of camshaft (3) and lubricate the lobes of the camshaft with clean engine oil.
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully install camshaft (3) into the cylinder block.
Illustration 4 g02311154
Lubricate the thrust washer with clean engine oil. Align Slot (X) in thrust washer (1) with dowel (2) in the cylinder block. Install thrust washer (1) into the recess in the cylinder block. Note: The thrust washer has one Slots (X).End By:
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install" for the correct procedure.
Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker shaft and Pushrod - Install" for the correct procedure.
Start By:
Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft and Pushrod - Remove" for the correct procedure.
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The engine should be mounted on a suitable stand and placed in the inverted position.
Illustration 1 g02311154
Remove thrust washer (1) from the cylinder block. Do not remove dowel (2) from the cylinder block unless the dowel is damaged. Note: The thrust washer has one Slots (X).
Illustration 2 g03449856
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully remove camshaft (3) from the cylinder block.
If necessary, remove key (4) from camshaft (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the camshaft and the thrust washer. Inspect the camshaft and the thrust washer for wear and for damage. Refer to Specifications, "Camshaft" for more information. Replace any components that are worn or damaged.
Clean the camshaft bearing in the cylinder block. Inspect the camshaft bearing for wear and for damage. Refer to Specifications, "Camshaft Bearings" for more information. If necessary, replace the camshaft bearing. Refer to Disassembly and Assembly, "Camshaft Bearing - Remove and Install".
Replace all lifters when a new camshaft is installed.
Inspect the lifters for wear and for damage. Refer to Specifications, "Lifter Group" for more information. Replace any lifters that are worn or damaged. Refer to Disassembly and Assembly, "Lifter Group - Remove and install" for the correct procedure.
Illustration 3 g03449856
If necessary, install a new key (4) into camshaft (3).
Lubricate the bearing surfaces of camshaft (3) and lubricate the lobes of the camshaft with clean engine oil.
Do not damage the lobes or the bearings when the camshaft is removed or installed.
Carefully install camshaft (3) into the cylinder block.
Illustration 4 g02311154
Lubricate the thrust washer with clean engine oil. Align Slot (X) in thrust washer (1) with dowel (2) in the cylinder block. Install thrust washer (1) into the recess in the cylinder block. Note: The thrust washer has one Slots (X).End By:
Install the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Install" for the correct procedure.
Install the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker shaft and Pushrod - Install" for the correct procedure.
Cat SIS web machinery list:
Parts gasket Caterpillar catalog:
824, 824B, 825B, 834, 988, 992
824B, 824S, 825B, 834, 988, D7G, D8K
769, 824, 824B, 825B, 834, 988
824, 824B, 834, 988
824B, 834
824B, 824G, 824G II, 824H, 834, 854G, 854K, 988, 992, AP-1050, D10, D10N, D10R, D10T, D10T2, D11N, D11R, D11T, D9L
950, 966C, 988
768B, 769, 824B, 834, 988, 992, D350E, D350E II, D35HP, D400, D400E, D40D
12E, 16, 769, 772, 773
769, 772, 773, 773B, 776, 777
769, 772, 773, 773B, 776, 777
12F, 14E, 16
D343, G343
D330A, D330B, D333B, D343
D343, G343
16, 1693, 583H, 583K, 631C, 651, 657, 657B, 666, 824, 983, 988, D342, D342C, D343, D353C, D375D, D397D, D8H, D8K, D9H, G343
4B4755
GASKET
3160, 3208, 3406, D320A, D336, D342C, D343, D348, D364, D375D, D379A, D397D, G343, G379
3160, 3208, 3406, D320A, D336, D342C, D343, D348, D364, D375D, D379A, D397D, G343, G379
D379, D379A, D398, G379, G398
16, 1693, 631C, 633C, 657, 657B, 769, 824B, 834, 983, 988, D343, G343
D343, G343
16, 1693, 657, 769, 824, 824B, 834, 988, D343
1693, 3406, 44, 931B, D336, D343, G3406
D343
1693, D343