GASKET 2V9383 - Caterpillar

Illustration 4 g01374083
Remove spring (14), orifice (13), and O-ring seal (12) from body (5) .
Remove spring (10), shims (9), inner piston (8), and outer piston (8) from body (5) .
Remove access plug (11) and the O-ring seal from body (5) .
Remove the bolts and cover (6) from body (5). Remove O-ring seal (7) from cover (6) .
Illustration 5 g00400255
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove spool (18) and stop (19) from valve housing (3) .
Remove slug (17) from spool (18) .
Remove access plug (15) and spring (16) from valve housing (3). Remove the O-ring seal from access plug (15) .
Illustration 6 g00400256
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) in order to remove the snap ring from spool (18) .
Illustration 7 g00400257
Remove retainer (22), spring (21), and valve ball (20) from spool (18) .
Illustration 8 g00564197
Remove access plug (24) and valve (23) from valve housing (3). Remove the O-ring seal from access plug (24) .
Illustration 9 g00400260
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove the bolts, the clip, cover (25) and spring (28) from valve housing (3). Note the position of the clip.
Remove O-ring seal (27) and shims (26) from cover (25) .
Remove access plug (31) and spool (29) from valve housing (3) .
Remove the O-ring seal from access plug (31) .
Remove slug (30) from spool (29).
Illustration 10 g00401745
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) in order to remove the snap ring from spool (29) .
Illustration 11 g00401747
Remove retainer (34), spring (33), and valve ball (32) from spool (29) .
Illustration 12 g00400261
Remove nipple assembly (36), dust cap (37), and access plugs (35) from valve housing (3). Remove the O-ring seals from access plugs (35) and nipple assembly (36) .