GASKET 2W5447 - Caterpillar

Ensure that the Safety Information, warnings, and instructions are read and understood before operation or maintenance procedures are performed.The user is responsible for the performance of all maintenance which includes the following items: performing all adjustments , using proper lubricants, fluids, and filters and replacing old components with new components due to normal wear and aging .Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Before each consecutive interval is performed, all of the maintenance requirements from the previous interval must also be performed.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.When Required
Fuel System - Prime
Maintenance Recommendations
Every Week
Air Tank Moisture and Sediment - Drain
Automatic Start/Stop - Inspect
Battery Charger - Check
Battery Electrolyte Level - Check
Cooling System Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Clean
Engine Oil Filter Differential Pressure - Check
Engine Oil Level - Check
Fuel System Fuel Filter Differential Pressure - Check
Fuel Tank Water and Sediment - Drain
Instrument Panel - Inspect
Jacket Water Heater - Check
Radiator - Clean
Standby Generator Set Maintenance Recommendations
Every Year
Air Starting Motor - Inspect
Air Starting Motor Lubricator Bowl - Clean
Alternator - Inspect
Cooling System Coolant Sample (Level 2) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Crankshaft Vibration Damper - Inspect
Electric Starting Motor - Inspect
Engine - Clean
Engine Air Cleaner Element (Dual Element) - Clean/Replace
Engine Air Cleaner Element (Single Element) - Clean/Replace
Engine Crankcase Breather - Clean
Engine Mounts - Check
Engine Oil Sample - Obtain
Engine Oil and Filter - Change
Engine Performance - Test
Engine Protective Devices - Check
Engine Speed/Timing Sensor - Clean/Inspect
Fan Drive Bearing - Lubricate
Fuel Injector - Inspect/Adjust
Fuel System Primary Filter - Clean/Inspect/Replace
Fuel System Secondary Filter - Replace
Hoses and Clamps - Inspect/Replace
Prelube Pump - Inspect
Standby Generator Set Maintenance Recommendations
Water Pump - Inspect
Every 3 Years
Batteries - Replace
Belts - Replace
Cooling System Coolant (DEAC) - Change
Cooling System Coolant Extender (ELC) - Add
Cooling System Water Temperature Regulator - Replace
Hoses and Clamps - Replace
Standby Generator Set Maintenance Recommendations
Turbocharger - Inspect
Every 6 Years
Cooling System Coolant (ELC) - Change
Standby Generator Set Maintenance Recommendations