GASKET-EXHAUST 2W7868 - Caterpillar

Illustration 1 g02182530
Illustration 2 g02182531
Illustration 3 g02183994
Prelube PumpThere may be several specific safety signs on your equipment. The exact location and a description of the signs are reviewed in this section. Please become familiar with all of the signs.Ensure that all of the signs are legible. Clean the signs or replace the signs if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap for cleaning the signs. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the signs. The signs that are loosened could drop off the equipment.Replace any sign that is damaged or missing. If a sign is attached to a part of the equipment that is replaced, install a new sign on the replacement part. Your Caterpillar dealer can provide new signs.
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
The safety signs that may be attached on the equipment are illustrated and described below.Universal Warning (1)This message is located on the rear of the terminal box.
g01370904
Do not operate or work on this product unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Automatic Starting (2)This warning is located on the rear cover of the generator and near each of the entrances.
g01392484
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode.
Crush (3)This warning is located next to the side load cable access door.
g01757733
Crushing Hazard! When the counterweight is in the fully extended position for servicing the machine, secure the extended counterweight with the counterweight lock lever.Use the counterweight lock lever to avoid possible personnel injury or death from crushing.
Shock (4)This message is located near the side load cable access door and the shore power access door.
g01372247
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Electrocution (5)
These danger messages are located on the doors of the switchgear and on the rear of the generator.
g01392482
Do not connect the generator to a utility electrical distribution system unless it is isolated from the system. Electrical feedback into the distribution system can occur and could cause personal injury or death.Open and secure the main distribution switch, or if the connection is permanent, install a double throw switch to prevent electrical feedback. Some generators are specifically approved by a utility to run in parallel with the