GASKET-COVER 3096664 - Caterpillar

Uninterruptible Power Supply: UPSB505 (S/N: YTM1-UP)Introduction
This Special Instruction covers the installation of the UPS Network Management Card.Do not perform any procedure and do not order parts that are outlined in this publication until you understand the information that is contained in this document.Important Safety Information
Work safely. Most accidents that involve product operation, maintenance, and repair are caused by failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing potentially hazardous situations before an accident occurs.A person must be alert to potential hazards. This person should also have the necessary training, skills, and tools in order to perform these functions properly.Safety precautions and warnings are provided in this instruction and on the product. If these hazard warnings are not heeded, bodily injury or death could occur to you or to other persons. Caterpillar cannot anticipate every possible circumstance that might involve a potential hazard.Therefore, the warnings in this publication and the warnings that are on the product are not all inclusive. If a tool, a procedure, a work method, or operating technique that is not recommended by Caterpillar is used, ensure that it is safe for you and for other people to use.Ensure that the product will not be damaged or the product will be made unsafe by the operation, lubrication, maintenance, or the repair procedures that are used.Preliminary Information
Features
The Network Management Card has standard features that do the following:
Detect 10/100 Mbps connection speeds
Provide a data log accessible by File Transfer Protocol (FTP), Secure CoPy (SCP), or a web browser
Provide an event log that is accessible by Telnet, Secure SHell (SSH), FTP, SCP, or a web browser
Generate system log (Syslog) messages
Enable you to configure a BOOTstrap Protocol (BOOTP) or Dynamic Host Configuration Protocol (DHCP) server to provide the TCP/IP values a Network Management Card needs for network communication
Generate e-mail notifications for UPS or system events
Limit SNMP traps, e-mail notification, and event logging based on severity and categories of events
Enable you to configure multiple Network Management Cards simultaneously over the network
Provide enhanced security by supporting SSH, Secure Sockets Layer (SSL) and Secure CoPy (SCP)
Support external environmental sensors
Support Modbus RTS via a RS-485 connectionInventory
The Network Management Card package includes the following items:
This Installation Manual
Network Management Card
Serial configuration cable
Temperature sensor or the Network Management Card only
Network Management Card quality assurance test slip
Declaration of Conformity
Warranty registration formSave the quality assurance test slip. The slip contains the MAC address that you may need when performing the procedures in "TCP/IP configuration methods".Handling
The Network Management Card is sensitive to static electricity. When handling the Network Management Card, touch only the end plate while using one or more of the electrostatic-discharge devices (ESDs). The electrostatic-discharge devices (ESDs) are wrist straps, heel straps, toe straps, or conductive shoes.Recycling
The shipping materials are recyclable. Save the materials for later use, or dispose appropriately.Management products, including the Network Management Card, contain removable, lithium coin-cell batteries. When discarding these batteries, follow local rules for recycling.Installation in a UPS
You do not need to turn off the power