GASKET-EXHAUST MANIFOLD 3208974 - Caterpillar

Assembly Procedure
Table 1
Required Tools
Tooling Part Number Description Qty
A FT-0745 Pliers 1
B 1P-1861 Retaining Ring Pliers 1
C 9S-6343 Fixture Assembly 1
D 8T-5096 Dial Indicator Gp 1
E 9S-6363 Turbocharger Fixture Group 1
F 4L-7464 Silicone Grease 1
G 5P-3931 Anti-Seize Compound 1 Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Ensure that all of the oil passages in the turbocharger cartridge housing are clean and free of dirt and foreign material.
Apply clean engine oil to all parts of the cartridge assembly.
Illustration 1 g00994048Note: Snap rings (1), (3), (4), and (7) must be installed with the round edge of the snap rings toward the bearing.
Use Tooling (A)