GASKET-PLATE 3548484 - Caterpillar

The power module is a complete, self-contained unit that can be towed to any location for the generation of electrical power. The power module can be utilized for prime power generation.The power module is equipped with the following components: engine, generator, control systems, radiator and exhaust systems.Engine
G3516B Generator Set Engines are electronically controlled natural gas engines. The engines are equipped with both jacket water aftercooling and separate circuit aftercooling.Engine efficiency and engine performance depend on adherence to proper operation and maintenance recommendations. Use the recommended fuels, lubrication oils, and coolant. Pay special attention to the air cleaner, to the fuel system, to the lubrication system, and to the cooling system maintenance. Refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule" for more information on maintenance items.
Table 1
Engine Specifications    
Item     G3516B Engine    
Cylinders and arrangement     60 degree V-16    
Bore    
170 mm (6.7 inch)    
Stroke    
190 mm (7.5 inch)    
Total displacement    
69 L (4210 cu in)    
Compression ratio     11.7:1    
Aspiration     TA with SCAC (1)    
Rotation (flywheel end)     Counterclockwise    
( 1 ) Turbocharged Aftercooled with Separate Circuit Aftercooling
Illustration 1 g00759595
G3516B Engine design (A) Inlet valves (B) Exhaust valves (C) FlywheelGenerator
The SR4B brushless generator can be used with the following loads: mixed loads of motors and lights, SCR-controlled equipment, computer centers, installations of communications and petroleum drilling applications. SR4B generators are utilized in three-phase full-wave excitation and regulation. The frame size determines whether the generators are four pole or six pole designs with six lead configurations or 12 lead configurations. The generator produces electrical power in 60 Hz applications.Power Module Enclosure
Basic Container
The enclosure for the power module is a shipping container that is mounted to an undercarriage chassis. The container meets the following standards and regulations:
ISO/TC 104 Requirements for cargo containers
ANSI/ MH5.1 Basic requirements for cargo containers
ANSI/MH5.1.1 Requirements for closed van containers
UIC Code 592-1 International union of railwayThe container is also certified and complies with International Convention for Safe Containers (CSC) nine-stack high.Access Door for the Load Cable
Crushing hazard! Read and understand the instructions and warnings in the Operation and Maintenance manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
The access door for the load cables may provide a crush hazard if the door is not secured in a proper fashion. To secure the door, open the door and push up on the center of the linkage.
Illustration 2 g00922582
Securing the access door for the load cables
Illustration 3 g00773429
Access door for the load cable
Illustration 4 g00773448
Bus bar with connected load leadsThe access door for the load cable is located outside of the power module. This access door is for access to the bus bars in order to connect the load leads. Fire Extinguishers
Illustration 5 g00773468
Fire extinguisherFire extinguishers are standard equipment.Louvers
Illustration 6 g00773474
LouverLouvers are installed in the power module in order to receive fresh air. The louvers are sized in order to meet the inlet air supply that is required for the