GASKET 3591578 - Caterpillar

Illustration 62 g03230600
Remove dowels (91) and bushing (92).
Illustration 63 g03230601
Attach Tooling (G) and a suitable lifting device to clutch backing plate (93). The weight of clutch backing plate (93) is approximately 18 kg (40 lb). Remove clutch backing plate (93).
Illustration 64 g03230602
Remove friction discs (94) and clutch plates (95).
Illustration 65 g03230603
Remove piston (96).
Illustration 66 g03231056
Illustration 67 g03231057
Remove seals (97) and (98).
Illustration 68 g03231076
Remove thrust plate (99), thrust washer (100), and thrust plate (101).
Illustration 69 g03231096
Attach Tooling (G) and a suitable lifting device to housing (102). The weight of housing (102) is approximately 110 kg (240 lb). Remove housing (102).
Illustration 70 g03231097
Turn housing (102) over and remove bolts (103) and gears (104) and (105). Remove roller race (106).
Illustration 71 g03231098
Remove seal rings (107), (108), (109), and (110). Drive in locator pin (112) and remove ring carrier (111). Remove inner bearing (114) and seal (113) from support carrier (115).
Illustration 72 g03231116
Attach Tooling (G) and a suitable lifting device to shaft assembly (116). The weight of shaft assembly (116) and support carrier (115) is approximately 82 kg (180 lb). Use the lifting device to turn support carrier (115) and shaft assembly (116) over onto other end.
Illustration 73 g03735532
Remove bolts (117) and bearing cage (118) from support carrier (115).
Illustration 74 g03231120
Position bearing cage (118) on the other side and remove lip seal (119).
Illustration 75 g03735536
Attach Tooling (J) and a suitable lifting device to shaft (115). The weight of shaft assembly (116) is approximately 82 kg (180 lb). Remove shaft assembly (116) from support carrier (115). Remove gasket (120).
Illustration 76 g03735539
Remove rotor (124). Remove seals (124) and seal carrier (123). Remove bearing (122) from shaft (116). Remove seal (121) and seal carrier (120).