GASKET 3830416 - Caterpillar

Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining and filling procedures
Illustration 1 g02157469
Loosen hose clamp (2) and hose clamp (3) in order to remove pre-cleaner (1). Repeat this step for the remaining pre-cleaner.
Illustration 2 g02158620
Remove baffles (4).
Illustration 3 g02157519
Attach Tooling (A) and a suitable lifting device to panel assembly (5). The weight of panel assembly (5) is approximately 44 kg (97 lb). Use Tooling (A) and the suitable lifting device in order to remove panel assembly (5).
Illustration 4 g02157969
Loosen hose clamp (6) in order to disconnect the hose. Disconnect hose clip (7) from the top radiator tank. Remove hose assembly (8).
Illustration 5 g02157999
Disconnect harness assemblies (10) and clips (9). Cut cable straps (11).
Illustration 6 g02158014
Remove hose assemblies (12).
Illustration 7 g02175856
Remove hose (13). Repeat this step for the opposite side.
Illustration 8 g02158413
Cut cable strap (14). Loosen hose clamp (15) in order to disconnect hose (16). Disconnect hose clamps (17) and set the hoses aside.
Illustration 9 g02175865
Loosen clamps (19) and remove tube assembly (18). Repeat this step for the opposite side. Note: Take appropriate precautions in order to ensure that the system is not contaminated when you are removing tube assembly (18).
Illustration 10 g02175873
Disconnect harness assembly (20). Cut cable strap (21) and cable straps (22) in order to disconnect harness assembly (20) from the air cleaner assembly.
Illustration 11 g02158323
Attach Tooling (A) and a suitable lifting device to support assembly (24) and support assembly (25). The combined weight of support assembly (24), support assembly (25), radiator top tank (23), and the air cleaner assemblies is approximately 142 kg (313 lb).
Remove bolts (26) and bolts (27).
Use Tooling (A) and the suitable lifting device in order to remove radiator top tank (23), support assembly (24), support assembly (25), and the air cleaner assemblies as one unit.
Illustration 12 g02158430
Remove support assembly (24) and support assembly (25) from radiator top tank (23). Remove air cleaner assemblies (28). Installation Procedure
Install radiator top tank (23) in the reverse order of the removal procedure.
Tighten clamps (19) to a torque of 7.5 1.0 N m (66.38 8.85 lb in).
Tighten hose clamp (15) to a torque of 8.5 1.0 N m (75.23 8.85 lb in).
Tighten hose clamp (6) to a torque of 1.4 0.3 N m (12.39 2.66 lb in).
Tighten hose clamp (3) to a torque of 4.5 1.0 N m (39.83 8.85 lb in).
Tighten hose clamp (2) to a torque of 4.5 1.0 N m (39.83 8.85 lb in).