GASKET-FLYWHEEL 3939748 - Caterpillar

Illustration 1 g00871723
There are two accelerator pedals that are inside the cab. One pedal is located at the front of the cab. One pedal is located at the rear of the cab.The accelerator pedal controls the ground speed of the machine when a travel direction has been selected. The accelerator pedal will only allow the machine to travel as fast as the setting of the machine speed control.Reference: Refer to Operation and Maintenance Manual, "Machine Speed Control" for more information.The accelerator pedal can also control the speed of the engine if the machine is in neutral. The engine speed should be set by using the engine speed control when the machine is being operated in the working mode.Reference: Refer to Operation and Maintenance Manual, "Engine Speed Control" for more information.Apply slight pressure to the accelerator pedal in order to release the brakes and the oscillation lock. Press the accelerator pedal further in order to move the machine. Releasing the accelerator will automatically apply the brakes and the oscillation lock.