GASKET 3G1845 - Caterpillar

3G1845 GASKET Caterpillar parts 943, 953, 953B, 963, 963B, 973

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3G1845
3G-1845
3G1845

Weight: 0.01 pounds 0 kg.

Buy GASKET 3G1845 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK LOADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

$12.41

06 Jun 2023

US: Florida-Parts-Z

3G1845 - Gasket fits Caterpillar (CAT)
FIRST PRICE PARTS

$8.49

11 May 2019
11 Hundredths Pounds
CTP: CTP

Caterpillar GASKET (3G1845)
3G1845 Weight(lbs): 0.10 Length(cm): 14.0000 Width(cm): 9.5000 Depth(cm): 0.1000

Show more prices Caterpillar parts

Number on catalog scheme: 21

For full view, you need register

Compatible equipment models: 3G1845:

TRACK LOADER 943 953 953B 963 963B 973 Caterpillar

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A Loctite C5-A Copper Anti-Seize
Loctite 8008(1) 1
(1) EAME alternative
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02344162
Disconnect tube assemblies (1) and (3).
Disconnect tube assembly (4).Note: Nuts (5) are a one time use part. Discard the nuts when the nuts are loosened.
Attach a suitable lifting device to turbocharger (2). The weight of turbocharger (2) is approximately 32 kg (70 lb). Remove nuts (5) and remove turbocharger (2).
Illustration 2 g02344169Note: Band clamps (6) are one time use parts. Discard the clamp assemblies if the clamps are loosened.
If needed, remove clamp assemblies (6) and separate the housings from the cartridge assembly.Installation Procedure
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Install turbocharger (2) in the reverse order.