GASKET COVER TO HOUSING 3H5945 - Caterpillar

Illustration 12 g00728317
Install plug (37) in valve body (26) . Tighten plug (37) to a torque of 50 7 N m (37 5 lb ft).
Illustration 13 g00728312
Install two pistons (36) , two springs (35) , two springs (34) , and two O-ring seals (33) in valve body (26) .
Illustration 14 g00728297
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install plate (33) and bolts (32) on valve body (26) . Install bracket (31) and install washers and bolts (30) .
Illustration 15 g00728292
Install O-ring seal (29) on valve body (26) .
Illustration 16 g00728257
Install valve body (26) . Install washers and bolts (28) . Install six washers and two bolts (27) . Install O-ring seal (25) .
Illustration 17 g00728255
Install plate (24) on brake control valve (1) .
Illustration 18 g00728217
Install O-ring seal (20) , screen (21) , O-ring seal (22) , and rectangular seal (23) on cartridge assembly (19) .
Illustration 19 g00728209
Install cartridge assembly (19) in manifold (6) . Tighten cartridge assembly (19) to a torque of 30 3 N m (22 2 lb ft). Install coil (18) , washer (17) , and nut (16) on cartridge assembly (19) . Tighten nut (16) to a torque of 9.5 1.5 N m (85 13 lb in).
Illustration 20 g00728204
Install O-ring seal (12) , screen (13) , O-ring seal (14) , and rectangular seal (15) on cartridge assembly (11) .
Illustration 21 g00728198
Install cartridge assembly (11) in manifold (6) . Tighten cartridge assembly (11) to a torque of 30 3 N m (22 2 lb ft). Install coil (10) , washer (9) , and nut (8) on cartridge assembly (11) . Tighten nut (8) to a torque of 9.5 1.5 N m (85 13 lb in).
Illustration 22 g00728175
Install O-ring seal (7) in manifold (6) .
Illustration 23 g00728168
Install manifold (6) on brake control (1) . Install four washers (5) on manifold (6) .
Illustration 24 g00728087
Install plate (4) on brake control (1) . Install washers and four bolts (3) . Tighten bolts (3) to a torque of 30 4 N m (22 3 lb ft). Install four cable straps (2) .End By: Install the brake control valve.