GASKET 3L1744 - Caterpillar

Remote Input/Output Dry Contact - Setup
The contacts are configured by using theUPSView software package.User Programmable Remote Input Contacts
Each of the six user programmable remote input contacts has an operating parameter. The operating parameter is used in order to configure that contact.The following list of functions can be assigned to the remote input contacts. Assignment is done by entering the parameter in the operating parameter for the associated remote input. Table 2 gives the defaults for the six input contacts.
Table 1
List of Functions for the Input Contacts
Function Description
0 None
1 On generator (1)
2 Remote switch UPS to bypass
3 Remote switch the UPS On-line (2)
4 Building alarm 1 yellow (3)
5 Building alarm 2 yellow (3)
6 Building alarm 3 yellow (3)
7 Building alarm 4 yellow (3)
8 Fire alarm yellow (3)
9 Remote alarm Silence (4)
10 Generator set start breaker open (5)
11 Room temperature abnormal (6)
12 External sync.
13 User-defined message notice 1 (7)
14 User-defined message notice 2 (7)
15 User-defined message alarm 1 (7)
16 User-defined message alarm 2 (7)
17 GSO Group A open
18 GSO Group B open
19 GSO Group C open
20 GSO Group D open
21 User-defined message normal 1
22 User-defined message normal 2
23 Remote spin down
24 On-line inhibit
25 Remote braking On Generator Mode - (1) Allows various limits to be set for the transient voltage detection, maximum input current, and walk-in rate operating parameters.Remote switch UPS to Bypass - (2) Used to command (remotely) the UPS to go to the on-line mode.Remote switch the UPS On-line - (3) Used to detect an external alarm, and log such an event in the UPS history file.Building Alarm 1 - Yellow - (4) Used to silence the alarm from a remote location.Building Alarm 2 - Yellow - A "breaker open" message is printed when the input is activated. A "breaker closed" message is printed when the input is deactivated.Building Alarm 3 - Yellow - A message is printed when the input is activated. A different message is printed when input is deactivated.Building Alarm 4 - Yellow - The message is defined by the user.
Table 2
Input Contact Default Function Assignments
Contact Function Description
1 1 On Generator
2 2 Remote Switch to the UPS to Bypass
3 3 Remote Switch to the UPS to On-Line mode
4 4 Building Alarm 1
5 5 Building Alarm 2
6 6 Building Alarm 3 User Programmable Remote Output Contacts
Each of the six user programmable remote output contacts has an operating parameter that is used to configure that contact. The following list of functions can be assigned to the remote output contacts. Assignment is done by entering the parameter in the menu for the operating parameter for the associated remote output. Each user programmable remote output contact provides a "Form C" connection. The user programmable remote output contact is rated for 3 A.
Table 3
Function List for the Output Contact
Function Description
0 None
1 - 100 Flywheel PERCENT ENERgy
101 On-line
102 Bypass
103 Discharging
104 Notice
105 Alarm
106 Overload
107 Cabinet temperature abnormal
108 External alarm (building and fire)
109 GSC unavailable
110 Overload to bypass
111 DC fuse blown
112 Fan problem
113 Generator set run (two-wire)
114 Generator set start (three-wire) 1 second