GASKET 3T5476 - Caterpillar

Illustration 1 g00101428
Unlatch the engine hood and raise the engine hood.
Illustration 2 g00102232
Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on containing fluid spillage.
Remove oil supply tube (1) from the cylinder head. Remove fitting (2) and seal (3) from the governor housing.
Use a 6 mm hexagon wrench in order to remove oil screen (4) .
Wash the oil screen in a clean, nonflammable solvent in order to remove any debris. Inspect the oil screen and the seals for damage. If necessary, replace the oil screen.
Install the oil screen into the governor housing. The oil screen should be far enough into the governor housing in order to allow clearance for the seals and for the fitting.
Install the seal, the fitting, and the oil supply tube.
Close the engine hood and latch the engine hood.