4180946 GASKET-CYLINDER HEAD Caterpillar parts
306E, 307E
Rating:
Alternative (cross code) number:
CA4180946
418-0946
4180946
CA4180946
418-0946
4180946
Weight: 0.48 pounds 0 kg.
MINI HYD EXCAVATOR,
Caterpillar parts catalog:
Information:
Drain
Illustration 1 g01355994
Stop the engine and allow the engine to cool. Loosen expansion tank filler cap (1) slowly in order to relieve any pressure. Remove the expansion tank filler cap.
Open the cooling system drain valve (if equipped).
In order to fully drain the coolant, remove the following plugs:
Remove plug (2) in order to vent the water near the water temperature regulator.
Illustration 2 g01637916
Remove drain plug (3) from the bottom heat exchanger.
Illustration 3 g01355996
Remove drain plug (4) from the bottom of the water cooled exhaust manifold.
Remove drain plugs (5) from the bottom of the jacket water pump inlet.
Remove drain plug (6) from the bottom of the oil cooler.
Allow coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Caterpillar Service Technology Group:Outside Illinois 1-800-542-TOOL
Inside Illinois 1-800-541-TOOL
Canada 1-800-523-TOOL
International 1-309-578-7372
Flush
Use of commercially available cooling system cleaners may cause damage to cooling system components. Use only cooling system cleaners that are approved for Caterpillar engines.
Flush the cooling system with clean water in order to remove any debris.
Close the drain valve (if equipped). Clean the drain plugs. Reinstall the drain plugs. Refer to the Operation and Maintenance Manual for more information on the proper torques.
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with a mixture of clean water and Caterpillar Fast Acting Cooling System Cleaner. Add 0.5 L (1 pint) of cleaner per 15 L (4 US gal) of the cooling system capacity. Install the expansion tank filler cap.
Start the engine and
Illustration 1 g01355994
Stop the engine and allow the engine to cool. Loosen expansion tank filler cap (1) slowly in order to relieve any pressure. Remove the expansion tank filler cap.
Open the cooling system drain valve (if equipped).
In order to fully drain the coolant, remove the following plugs:
Remove plug (2) in order to vent the water near the water temperature regulator.
Illustration 2 g01637916
Remove drain plug (3) from the bottom heat exchanger.
Illustration 3 g01355996
Remove drain plug (4) from the bottom of the water cooled exhaust manifold.
Remove drain plugs (5) from the bottom of the jacket water pump inlet.
Remove drain plug (6) from the bottom of the oil cooler.
Allow coolant to drain.
Dispose of used engine coolant properly or recycle. Various methods have been proposed to reclaim used coolant for reuse in engine cooling systems. The full distillation procedure is the only method acceptable by Caterpillar to reclaim the used coolant.
For information regarding the disposal and the recycling of used coolant, consult your Caterpillar dealer or consult Caterpillar Service Technology Group:Outside Illinois 1-800-542-TOOL
Inside Illinois 1-800-541-TOOL
Canada 1-800-523-TOOL
International 1-309-578-7372
Flush
Use of commercially available cooling system cleaners may cause damage to cooling system components. Use only cooling system cleaners that are approved for Caterpillar engines.
Flush the cooling system with clean water in order to remove any debris.
Close the drain valve (if equipped). Clean the drain plugs. Reinstall the drain plugs. Refer to the Operation and Maintenance Manual for more information on the proper torques.
Fill the cooling system no faster than 19 L (5 US gal) per minute to avoid air locks.
Fill the cooling system with a mixture of clean water and Caterpillar Fast Acting Cooling System Cleaner. Add 0.5 L (1 pint) of cleaner per 15 L (4 US gal) of the cooling system capacity. Install the expansion tank filler cap.
Start the engine and
Parts gasket Caterpillar catalog:
1117899
GASKET
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
3879868
GASKET
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 306E, 307E, 308E, 308E CR, 308E SR, 906H2, 907H2, 908H2, 910K, 914K
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 306E, 307E, 308E, 308E CR, 308E SR, 906H2, 907H2, 908H2, 910K, 914K
3830475
GASKET
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 303.5E, 304E, 305.5E, 305E, 306E, 307E, 308E, 308E CR, 308E SR, 308E2 CR, 901C, 902C, 903C, 906H2, 907H2, 90...
236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 303.5E, 304E, 305.5E, 305E, 306E, 307E, 308E, 308E CR, 308E SR, 308E2 CR, 901C, 902C, 903C, 906H2, 907H2, 90...
3887458
GASKET
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 306E, 307E, 308E, 308E CR, 308E SR, 308E2 CR, 906H2, 907H2, 908H2
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 306E, 307E, 308E, 308E CR, 308E SR, 308E2 CR, 906H2, 907H2, 908H2
3879879
GASKET
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 306E, 307E, 308E, 308E CR, 308E SR, 308E2 CR, 906H2, 907H2, 908H2
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 306E, 307E, 308E, 308E CR, 308E SR, 308E2 CR, 906H2, 907H2, 908H2
3879819
GASKET
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 306E, 307E, 308E, 308E CR, 308E SR, 906H2, 907H2, 908H2
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 306E, 307E, 308E, 308E CR, 308E SR, 906H2, 907H2, 908H2
3887524
GASKET
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 303E CR, 306E, 307E, 308E, 308E CR, 308E SR, 906H2, 907H2, 908H2
236D, 242D, 246D, 257D, 259D, 262D, 277D, 279D, 287D, 289D, 303E CR, 306E, 307E, 308E, 308E CR, 308E SR, 906H2, 907H2, 908H2
3879794
GASKET
303E CR, 306E, 307E, 308E, 308E CR, 308E SR
303E CR, 306E, 307E, 308E, 308E CR, 308E SR
3887449
GASKET
306E, 307E, 308E, 308E CR, 308E SR
306E, 307E, 308E, 308E CR, 308E SR
3887452
GASKET
306E, 307E, 308E, 308E CR, 308E SR
306E, 307E, 308E, 308E CR, 308E SR
4181025
GASKET
306E, 307E
306E, 307E
4181481
GASKET-FLANGE
306E, 307E
306E, 307E
4180945
GASKET-CYLINDER HEAD
306E, 307E
306E, 307E
4180944
GASKET-CYLINDER HEAD
306E, 307E
306E, 307E
4180970
GASKET-VALVE
306E, 307E
306E, 307E
3886203
GASKET
M313D, M315D
M313D, M315D
3886201
GASKET
M313D, M315D
M313D, M315D
3887452
GASKET
306E, 307E, 308E, 308E CR, 308E SR
306E, 307E, 308E, 308E CR, 308E SR
4181489
GASKET
306E, 307E
306E, 307E
4181511
GASKET
306E, 307E
306E, 307E
4181484
GASKET-WATER PUMP
306E, 307E
306E, 307E
4181481
GASKET-FLANGE
306E, 307E
306E, 307E
4180977
GASKET-FRONT
306E, 307E
306E, 307E
4181025
GASKET
306E, 307E
306E, 307E