GASKET 4360860 - Caterpillar

Illustration 1 g00322951
Install valve (33), spring (32), and guide (31) on seal (34).
Illustration 2 g00322950
Install valve assembly (30) in the hydraulic tank. Install nuts (29).
Illustration 3 g00322948
Install screen (26), plate (27), and locknut (28) on baffle (25). Tighten locknut (28) to a torque of 20 5 N m (15 4 lb ft).
Install O-ring seal (24) on baffle (25).
Illustration 4 g00322947
Install baffle assembly (23) on the hydraulic tank. Install bolts (22).
Illustration 5 g00322946
Install screen (18), washer (19), washer (20), and nut (21) on strainer (17).
Install O-ring seal (16) on strainer (17).
Illustration 6 g00322902
Install strainer assembly (15) on the hydraulic tank. Install bolts (14).
Illustration 7 g00322901
Install screens (12) and (13) on the hydraulic tank. Install bolts (11).
Illustration 8 g01140872
Clean the mating surfaces of the hydraulic tank and apply Tooling (A) to the mating surfaces of the hydraulic tank. Note: Make sure that the ends of Tooling (A) overlap in a crisscross manner, as shown.
Illustration 9 g00322900
Use two people in order to join the two halves of the hydraulic tank. The weight of the hydraulic tank is 98 kg (216 lb). Install bolts (10).
Illustration 10 g00322899
Install setscrew (7) and the O-ring seal on sight glass (8). Install cap (9) and the O-ring seal on sight glass (8).
Illustration 11 g00322895
Install O-ring seals (6) on both sides of sight gauge (5).
Illustration 12 g00322894
Install sight gauge (5) on the hydraulic tank. Install bolts (4) on sight gauge (5). Tighten bolts (4) to a torque of 7 1 N m (62 9 lb in).
Illustration 13 g00322893
Install O-ring seal (3) on top cover assembly (2).
Illustration 14 g00322892
Install top cover assembly (2) on the hydraulic tank. Install bolts (1) on top cover assembly (2). End By:
Install the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank (Steering)(Brake) - Install".