GASKET KT-YM 4374584 - Caterpillar

ACTION REQUIRED
The new Arm was shipped direct from the factory. Do not order it through the parts system. Contact Mr.Songsitti Wisasnakorn at Wisasnakorn_Songsitti if you have not received the Arm Assy or have any problems with it.
Refer to the attached Rework Procedure for replacement and required components.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-2000 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2001-5000 hrs,
13-24 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
5001-10000 hrs,
25-48 mo 0.0% 50.0% 0.0% 0.0% 75.0% 50.0%
This is a 5.0-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Refer to the Service Manual if/as necessary and see Special Instruction REHS8549 "Installation of 6SU (S/N: RTF; RTE) Bulldozer on a D6R2 and D6R Track-Type Tractor" in order to replace the push arms and related parts.
Note:
- Push Arm part number 179-6151 and 179-6162 will be sent directly from the factory to the dealer.
Note: Refer to the parts list in Image1.2.2 for replacement and reused parts.
Image1.2.1
Image1.2.2