GASKET 4F9785 - Caterpillar

Note: If you install a Dry Contact I/O Accessory at your UPS Network Management Card (NMC), the "Environment" tab displays two top menu bar options, "Universal I/O" and "Environment". Except where noted, the settings described in this chapter are available for both options.Overview Page
The "Overview" page lists the status of environmental monitoring devices associated with the Network Management Card With Environmental Monitoring.
Table 1
Heading    Displayed Information    
Temperature and Humidity     Lists all sensors and, for each sensor, the alarm status, temperature currently recorded, and humidity (if supported) currently recorded. For detailed status or to reconfigure the sensors parameters, click the sensors name.    
Input Contacts     Lists each enabled input contact and the inputs alarm status and current state (open or closed). For detailed status of an enabled input contact or to reconfigure that contacts parameters, click the name of the contact.
Note: To view or configure the parameters of a disabled contact, or to enable the contact, access the interface page for that contact through "Input Contacts" on the left navigation menu.    
Output Relay     Lists the alarm status and the current state (open or closed) of the output relay of the integrated Environmental Monitor. For detailed status of that output relay or to reconfigure the output relays parameters, click the output relays name.    
Recent Environmental Events     The "Recent Environmental Events" field lists, in reverse chronological order, the most recent environmental events. To view the entire event log, click "More Events" at the lower right.    Temperature and Humidity Page
Brief Status
Click "Temp & Humidity" on the left navigation menu to display the name, alarm status, temperature, and humidity (if supported) for each sensor.Detailed Status and Configuration
Click the name of a sensor for detailed alarm status or to configure the sensors values:Identification and Alarm Status
Table 2
Parameter    Description    
Name     A name for this sensor. Maximum: 20 characters.    
Location     This physical location of the sensor. Maximum: 20 characters.    
Alarm Status     One of the following is displayed:
"Normal" if this sensor is not reporting an alarm condition.
If this sensor is in an alarm state, the text of the alarm, indicating which threshold is violated, and the severity of the alarm, indicated by color (red for critical, orange for warning).    
Thresholds     See the next two sections for descriptions of the configurable thresholds and "Hysteresis" values.    Thresholds
For each sensor, you set the same types of thresholds for temperature and (if supported) humidity measured at the sensor.
Table 3
Threshold    Description    
Maximum     If the threshold for maximum temperature or for maximum humidity for the sensor is exceeded, an alarm occurs.    
High     If the threshold for high temperature or for high humidity for the sensor is exceeded, an alarm occurs.    
Low     If the temperature or humidity drops below the low threshold for the sensor, an alarm occurs.    
Minimum     If the temperature or humidity drops below the minimum threshold for the sensor, an alarm occurs.    Hysteresis
Use