GASKET 4L7562 - Caterpillar

Power Flow in SIXTH Speed
clutch number 2 (6) and clutch number 3 (9) are engaged in SIXTH speed. Torque is transferred from the transfer gears to input shaft (1). Rotating housing (2) is splined to input shaft (1). Rotating housing (2) turns with input shaft (1). Rotating housing (2) spins the plates of clutch number 2 (6). Because clutch number 2 (6) is engaged, the discs of the clutch number 2 (6) clutch hold coupling ring gear (27) .Coupling ring gear (27) turns with rotating housing (2) and input shaft (1). Coupling ring gear (27) is splined to planetary carrier (29). Planetary carrier (29) turns with coupling ring gear (27). The planetary carrier is splined to center shaft (7). Center shaft (7) is driven in the same direction and at the same speed as input shaft (1) .Sun gear (10) is splined to center shaft (7). Sun gear (10) is also splined to coupling hub (26). clutch number 3 (9) is engaged. The discs of clutch number 3 (9) hold coupling hub (26). clutch number 3 (9) is a rotating clutch. Rotating housing (8) of the clutch number 3 and center shaft (7) turn in the same direction and at the same speed. Rotating housing (8) of clutch number 3 (9) is fastened to planetary carrier (25). Planetary carrier (25) is splined to ring gear (13). Ring gear (13) and center shaft (7) turn in the same direction and at the same speed.Sun gear (15) is splined to center shaft (7). Sun gear (15) and ring gear (13) turn in the same direction and at the same speed. This holds planetary gears (23). The planetary carrier and output shaft (20) are driven in the same direction as center shaft (7) and at the same speed as center shaft (7) .The output shaft turns in the same direction as input shaft (1). The output shaft and the input shaft turn at the same speed.Power Flow in REVERSE
clutch number 1 (5) and clutch number 6 (16) are engaged in REVERSE speed. Torque is transferred from the transfer gears to input shaft (1). Rotating housing (2) is splined to input shaft (1). Rotating housing (2) turns with input shaft (1). Rotating housing (2) spins the plates of clutch number 1 clutch (5). Because clutch number 1 (5) is engaged, the discs of the clutch number 1 (5) hold ring gear (28) .Ring gear (28) turns with rotating housing (2) and input shaft (1). Sun gear (3) is splined to a stationary shaft. Sun gear (3) does not turn. Planetary gears (4) move around the outside of sun gear (3). This drives planetary carrier (29). Planetary carrier (29) turns in the same direction as input shaft (1), but at a different speed. Planetary carrier (29) is splined to center shaft (7). Center shaft (7) and planetary carrier (29) are driven in the same direction and at the same speed.Sun gear (15) is splined to center shaft (7). Sun gear (15) spins planetary