GASKET-FUEL PUMP HOUSING 4L7631 - Caterpillar

Illustration 1 g02560957
Illustration 2 g02560958
Tightening sequence for the locknuts
Table 1
Specification for 164-4637 Exhaust Manifold Gp
Item Qty Part Specification Description
1 11 106-1792 Taperlock Stud Torque to 35 5 N m (26 4 lb ft)
1 4S-6137 Taperlock Stud
- - Before use apply sealer, the ends of the exhaust manifolds should be clean and free from dirt, rust, grease, and oil.
2 2 102-8608 Exhaust Manifold Before assembly, apply 2P-2333 High Temperature Sealer to the outer diameter of the male ends of the exhaust manifold. Remove excess sealer from the assembled joint.
3 1 102-8501 Exhaust Manifold Before assembly, apply 2P-2333 High Temperature Sealer to the inner diameter of the female ends of the exhaust manifold. Remove excess sealer from the assembled joint.
4 12 2N-2766 Locknut Before assembly, apply 4C-5599 Anti-Seize Compound to the threads.
Refer to Illustration 2 in order to tighten the locknut 1 through locknut 12 to 50 5 N m (37 4 lb ft).
Do not reuse.