GASKET 4N3841 - Caterpillar

Display
Illustration 1 g06083452
Display
Illustration 2 g06100258
Keypad for the display
(1) Camera Status LED Lights
(2) Button Status LED Lights
(3) Light Sensor
(4) Camera Selection
(5) Automatic Brightness
(5) Contrast Button
(7) Brightness Button
(8) Camera Scroll / Menu Back Function
(9) Decrease Adjustment Button
(10) Increase Adjustment Button
(11) Standby Function / Enter / Power ON/OFF ButtonSingle Camera System
Available Selections for the Operator for the WAVS Display
The selections that are listed in this section have been made available to the operator of the machine. The selections for the display for the Caterpillar Work Area Vision System (WAVS) can be changed by the operator as the operator needs. Refer to Table 1. Refer to Illustration 2.Adjustment for Brightness
The option of adjustment for brightness allows the operator to vary the brightness of the view that is shown on the display. The display may appear white in an area that is lighted if the following conditions exist:
The level for brightness is high.
The automatic brightness is not enabled.Adjustment for Contrast
The option for adjustment of contrast allows the operator to vary the contrast of the view that is shown on the display."Manual Camera" Selection
Manual mode is available only on installations of WAVS Multiple Camera.Note: The manual mode is not available for installations of WAVS Single Camera.Automatic Brightness "ON/OFF"
The option for automatic brightness "ON/OFF" allows the operator to set the display to change the level of brightness automatically. The WAVS display is equipped with a sensor to detect ambient light. When WAVS is placed in the mode for automatic brightness, the display will illuminate with decreased ambient light. Also, the display will dim automatically