GASKET 4W3938 - Caterpillar

Adjustment of the Sway Limiters
Illustration 1 g00512741
When setting the sway limiters to permit side sway, be sure that there is no possibility of the tracks contacting the drafts arms or the implement.
The sway limiters can be adjusted to two different positions without the use of tools. The FORWARD position of the blocks will prevent the three-point hitch from swaying. The REAR position allows a limited amount of three-point hitch side sway when you lower the implement.Allowing the implement to sway is particularly helpful when you turn the machine with a load on the draft arms. When possible, allow the three-point hitch to use the extended three-point hitch side sway. This provides a three-point hitch side sway through a longer working range.Note: If the extended three-point hitch side sway is used, the lift links should be shortened to 750 mm (29.5 inch) or less. This will prevent