GASKET 5371632 - Caterpillar

Hot oil and components can cause personal injury.Do not allow hot oil or components to contact skin.
Do not under fill or overfill engine crankcase with oil. Either condition can cause engine damage.
Illustration 1 g01047439
Open the access cover on the left side of the machine.
Illustration 2 g01218549Note: Your machine is equipped with one of the two dipsticks that are shown.
Illustration 3 g01223388
(A) Full mark at the engine running position("LOW IDLE")
Illustration 4 g01218685
(B) Full mark with cold engine oil ("ENGINE STOPPED")
Check the "SAFE OPERATING RANGE" side or the "LOW IDLE" side of dipstick (1) while the engine is running at low idle. The oil should be at operating temperature. Maintain the oil level to the "FULL" mark. Check the "SAFE STARTING RANGE" side or the "ENGINE STOPPED" side of dipstick (1) before starting the engine when the engine oil is cold. Maintain the oil level to the "FULL" mark.Note: When you operate the machine on severe slopes, the oil level in the engine crankcase must be in the "SAFE OPERATING RANGE" zone or "LOW IDLE" zone of the dipstick.
Remove oil filler cap (2). If necessary, add oil.
Clean the oil filler cap and install the oil filler cap.
Close the access cover.