GASKET KT-SCH 5678463 - Caterpillar

Illustration 2 g02350615
Illustration 3 g02350616
Illustration 4 g02350917
Illustration 5 g02350919
Illustration 6 g02351205
Installation Procedure
Illustration 7 g02361024
Route harness assembly (6) as shown. Connect harness assembly (6) with wires J850-WH, 235-BK, and H856-BR to platform harness (A).
Connect harness assembly (6) with wires J850-WH, 235-BK, and H856-BR to connection plate (B) as shown. Secure harness assembly (6) using straps (1) .
Depending on your machines configuration refer to Illustration 6 for additional connections of harness assembly (6) .
Illustration 8 g02361038
Route harness assembly (6) as shown. Install clip (3) using existing hardware. Depending on your machines configuration refer to Illustration 4 and 5 for the connections of harness assembly (6) .
Secure harness assembly (6) using straps (1) .
Illustration 9 g02361258
Remove covers (C) and (D) .
Illustration 10 g02361259
Route harness assembly (5) along cab harness (E) as shown. Connect harness assembly (5) to cab harness (E). Refer to Illustration 3.
Secure harness assembly (5) using straps (1) and (2) .
Illustration 11 g02361260
Detail A
Connect harness assembly (5) to location E on the connection panel, as shown. Refer to Illustration 3.
Illustration 12 g02367276
Remove cover (F). Route harness assembly (5) along cab harness (E) as shown. Connect harness assembly (5) with wires J850-WH, 235-BK, and H856-BR to connection plate (B) as shown. Note: Harness assembly (5) and harness assembly (6) (not shown) should line up in the same port of connection plate (B) .
Secure harness assembly (5) using straps (1) .
Illustration 13 g02367478
Route harness assembly (5) along cab harness (E) as shown. Connect harness assembly (5) to cab harness (E) and boom float switch (G). Refer to Illustration 2.
Secure harness assembly (5) using straps (1) .
Ensure harness assemblies (5), and (6) do not interfere with any sharp edges, hydraulic lines, or electrical lines.