GASKET KIT 5P2529 - Caterpillar

Do not disconnect the air lines until the air pressure in the system is at zero.
1. Open the drain valve on the tank.2. Remove two tube assemblies (1). Disconnect four hose assemblies (2).3. Remove fine bolts (3) and remove compressor and gasket. The following steps are for the installation of the compressor.4. Position gasket and compressor and install bolts (3).5. Connect four hose assemblies (2) and two tube assemblies (1).End By:a. fill cooling system For more information on disassembly and assembly of the air compressor, see Single Cylinder Air Compressor Form No. REG01343, or for two cylinder compressors, see Midland Air Compressor, Form No. SENR7549.