GASKET KIT V 5P9550 - Caterpillar

There may be several specific safety messages on your engine. The exact location and a description of the safety messages are reviewed in this section. Become familiar with all safety messages.Ensure that all the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off the engine.Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Cat dealer can provide new safety messages.Note: Some engine components have been removed to increase the visibility of the safety labels.
Illustration 1 g06303057
View of the right side of a typical CG137-08 Petroleum Engine
(1) Universal warning
(2) Canadian Standards Administration - Do not disconnect
(3) Electrical shock
(5) Canadian Standards Administration - Do not disconnect
Illustration 2 g06303060
VIEW OF THE LEFT SIDE OF A TYPICAL CG137-08 PETROLEUM ENGINE
(1) UNIVERSAL
(3) ELECTRICAL SHOCK
(4) CANADIAN STANDARDS ADMINISTRATION - DO NOT DISCONNECTUniversal Warning (1)
Illustration 3 g01370904One safety message is located towards the front of the valve cover base on both sides of the engine.
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Cat dealer for replacement manuals. Proper care is your responsibility.
Canadian Standards Administration - Do Not Disconnect (2)
Illustration 4 g03290976One safety message may be on the box for the electronic control module (ECM).
Do not disconnect equipment unless power has been disconnected or the area is known to be non-hazardous. Explosion hazard: Substitution of components may impair suitability for Class 1, Division 2.
Shock Hazard (3)
Illustration 5 g01372247One safety message is located towards the rear of the valve cover base on both sides of the engine.
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Canadian Standards Administration - Do Not Disconnect (4)
Illustration 6 g02561600One safety message may be on the box for the controller.
Do not disconnect equipment unless power has been disconnected or the area is known to be non-hazardous. Explosion hazard: Substitution of components may impair suitability for Class 1, Division 2.
Canadian Standards Administration - Do Not Disconnect (5)
Illustration 7 g02561597
Safety message for a 24V 35A alternator
One safety message may be on the alternator.
Do not disconnect equipment unless power has been disconnected or the area is known to be non-hazardous. Explosion hazard: Substitution of components may impair suitability for Class 1, Division 2.