GASKET KIT RR 5P9820 - Caterpillar

Features/Benefits
* Used to remove sleeve bearings from boom and stick - essential to remove large bearing sleeves used on 5000 Series Hydraulic Excavators and 5000 Series Front Shovels* Bearing puller adapters allow easy removal of sleeve bearings and reduce chance of damage to bearing bore* Used with the following tooling when adapter plate has M64 threaded holes: 4C-6504 Threaded Puller Rod, 9U-6800 Fast Runner Nut, 5P-5201 Hydraulic Cylinder, 3S-6224 Hydraulic Pump - 115 VAC or 8S-8033 Hydraulic Pump - 230 VAC, and 6D-7726 Hydraulic Hose* Used with the following tooling when adapter plate has 1 1/4-12 threaded holes: 4C-3694 Threaded Puller Rod, 9U-6832 Fast Runner Nut or 7H-7539 Nut, 4K-0684 Washer, Hardened (1 1/4 inch), 6V-3175 Hydraulic Cylinder, 3S-6224 Hydraulic Pump - 115 VAC or 8S-8033 Hydraulic Pump - 230 VAC, and 6D-7726 Hydraulic Hose* A 1 1/4 inch hardened washer must be used when using 1 1/4-12 threaded puller rods and 7H-7539 NutSpecifications/Technical Information
9U-5337 Adapter Plate:
Used on sleeve bearing - 6I-7348Outside diameter - 91.0 mm (3.58 inch)Small diameter - 79.0 mm (3.11 inch)Threaded puller hole - 1 1/4-121U-6203 Adapter Plate:
Used on sleeve bearing - 102-2291Outside diameter - 315.4 mm (12.42 inch)Small diameter - 279.0 mm (10.98 inch)Threaded puller hole - M64 x 61U-6204 Adapter Plate:
Used on sleeve bearing - 6I-7770Outside diameter - 345.4 mm (13.60 inch)Small diameter - 299.0 mm (11.77 inch)Threaded puller hole - M64 x 61U-6217 Adapter Plate:
Used on sleeve bearing - 108-9254Outside diameter - 185.4 mm (7.30 inch)Small diameter - 159.0 mm (6.26 inch)Threaded puller hole - 1 1/4-129U-6261 Adapter Plate:
Used on sleeve bearing - 102-2301Outside diameter - 160.0 mm (6.30 inch)Small diameter - 139.0 mm (5.47 inch)Threaded puller hole - 1 1/4-129U-6904 Adapter Plate:
Used on sleeve bearing - 6I-7381Outside diameter - 225.4 mm (8.87 inch)Small diameter - 199.0 mm (7.83 inch)Threaded puller hole - M64 x 69U-6905 Adapter Plate:
Used on sleeve bearing - 6I-7300Outside diameter - 285.1 mm (11.22 inch)Small diameter - 239.0 mm (9.41 inch)Threaded puller hole - M64 x 69U-6906 Adapter Plate:
Used on sleeve bearing - 6I-7301Outside diameter - 245.4 mm (9.66 inch)Small diameter - 219.0 mm (8.62 inch)Threaded puller hole - M64 x 69U-6907 Adapter Plate:
Used on sleeve bearing - 6I-7346Outside diameter - 145.4 mm (5.72 inch)Small diameter - 119.0 mm (4.69 inch)Threaded puller hole - 1 1/4-12
Illustration 1. Typical Bearing Puller Adapter
Illustration 2. Installation of Bearing Sleeve Tooling on Stick Assembly(1) Hydraulic cylinder. (2) Threaded puller rod. (3) Sleeve bearing. (4) Bearing puller adapter plate.