5S7803 GASKET Caterpillar parts
621, 621B, 623, 623B, 627, 627B
Rating:
Alternative (cross code) number:
CA5S7803
5S-7803
5S7803
CA5S7803
5S-7803
5S7803
Weight: 0.05 pounds 0 kg.
WHEEL TRACTOR,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
$9.01
23 Apr 2021
0.5070[0.23] Pounds
US: IronDT
CTP Caterpillar Gasket (5s7803)
CTP
CTP
Number on catalog scheme:
11
For full view, you need register
Caterpillar parts catalog:
Information:
Remove Valves
Start By:a. remove cylinder head 1. Put spring (2) under compression with Tool (A). Remove locks (1). Remove Tool (A), rotocoil assembly (3) and spring (2). If the valves are to be used again, put identification on each valve as to its location for correct installation.2. Remove shield (4) and valve (5). 3. Use Tool (B) to check the condition of the springs. Make reference to the Specifications Manual to find the correct spring specifications.4. Do Steps 1 through 3 for the remainder of the valves.Install Valves
1. Put shields (1) in position on rotocoil assembly (2). Make sure the shoulder of the shield is against the end of the rotocoil assembly. 2. Put clean oil on the valve stem. Put valve (3) and spring (4) in position in the head. Install rotocoil assembly (2) on the valve stem.
Locks can be thrown from the valve when the spring compressor is released if the locks are not in their correct position. To prevent personal injury, make sure the locks are in the correct position before the spring compressor is removed.
3. Put springs (4) under compression with Tool (A). Install locks (5) with the thick end up.4. Remove Tool (A) and hit the valve with a soft hammer to be sure the locks and valves are in their correct positions.End By:a. install cylinder head
Start By:a. remove cylinder head 1. Put spring (2) under compression with Tool (A). Remove locks (1). Remove Tool (A), rotocoil assembly (3) and spring (2). If the valves are to be used again, put identification on each valve as to its location for correct installation.2. Remove shield (4) and valve (5). 3. Use Tool (B) to check the condition of the springs. Make reference to the Specifications Manual to find the correct spring specifications.4. Do Steps 1 through 3 for the remainder of the valves.Install Valves
1. Put shields (1) in position on rotocoil assembly (2). Make sure the shoulder of the shield is against the end of the rotocoil assembly. 2. Put clean oil on the valve stem. Put valve (3) and spring (4) in position in the head. Install rotocoil assembly (2) on the valve stem.
Locks can be thrown from the valve when the spring compressor is released if the locks are not in their correct position. To prevent personal injury, make sure the locks are in the correct position before the spring compressor is removed.
3. Put springs (4) under compression with Tool (A). Install locks (5) with the thick end up.4. Remove Tool (A) and hit the valve with a soft hammer to be sure the locks and valves are in their correct positions.End By:a. install cylinder head
Parts gasket Caterpillar catalog:
621, 621B, 621R, 623, 627B, 631C, 633C, 637D, 641, 641B, 651, 657B, 815, 816, 824B, 826B, 834, 950, 966C, 980, 980B, 988, 992
621, 623, 641, 641B, 650B, 651, 657, 657B, 666, 824, 824B, 988
621, 980
621, 980
621, 980
627, 657B, 666B, 772, 773
621, 623, 980, D10
621, 980
621
627, 627B, 637, 637D, 639D, 657B, 666B, 769C, 773B, 776, 777
621, 623
621
6D5407
GASKET
621, 623, 627
621, 623, 627
621, 980
621, 980
621, 980
621, 980
2S0339
GASKET
621, 980
621, 980
5S0599
GASKET
621, 623
621, 623
3S4731
GASKET
621, 621R, 623
621, 621R, 623
2S0036
GASKET
621, 980
621, 980
2S0032
GASKET
621, 980
621, 980
8S9507
GASKET
621
621
621, 623, 627