GASKET 6B5698 - Caterpillar

Table 1
Effectivity
S/N:5ZL00125-UP
S/N:7TJ00002-UP
S/N:4CS00219-UP
S/N:7LL00106-UP
S/N:4HZ00237-UP
S/N:6JC00109-UP
S/N:2TK00115-UP
S/N:5ER00128-UP
S/N:AFS00101-UP
S/N:84A75105-UP
S/N:4YC78003-UP
S/N:4XJ78002-UP
S/N:3PR78005-UP
S/N:FKR01885-UP
S/N:2YW00106-UP
S/N:2PZ00107-UP
S/N:8GB78009-UP
S/N:6HK99382-UP
S/N:1HW00135-UP
S/N:APX75002-UP
S/N:5AZ00428-UP
S/N:MSY00549-UP
S/N:DMC00156-UP
S/N:9ZC78003-UP
S/N:2BW83002-UP
S/N:SHH00315-UP
S/N:SPD00415-UP
S/N:3SJ75002-UP
S/N:1HL78008-UP
S/N:4AR77003-UP
S/N:4GZ00002-UP
S/N:ATY01125-UP
S/N:CBR00109-UP
S/N:FDB01704-UP
S/N:5YW00278-UP
S/N:JSM00489-UP
S/N:9YF77002-UP
S/N:3TZ00381-UP
S/N:44200341-UP
S/N:DWC00358-UP
S/N:SE401716-UP Rework Procedure
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
Table 2
Qty New Pt. No. Former Pt. No.
2 165-3931 Bolt 0S-1571 Bolt 0S-1594 Bolt
1 361-7097 Ring 8N-1991 Retaining Ring
1 361-7098 Flange 8N-1992 Retainer
Illustration 1 g03289320
(1) 0S-1594 Bolt
(2) 5M-2894 Hard Washer
(3) 8N-1992 Retainer
(4) 0L-1351 Bolt
(5) 165-3931 Bolt
Remove bolts (1), (4), and (5). Bolts (4) and (5) and washers (2) will be reused.
Remove the tube.
Illustration 2 g03289321
(2) 5M-2894 Hard Washer
(3) 8N-1992 Retainer
(4) 0L-1351 Bolt
(5) 165-3931 Bolt
(6) 361-7098 Flange
(7) 361-7097 Ring
Install one ring (7) and flange (6) onto the tube.
Attach the tube to the oil block using two bolts (5) and washers (2). Attach the opposite end of the tube to the oil filter housing using the previously removed hardware.
Install bolts (4).