GASKET 6B7020 - Caterpillar

Generator Set:
3516B (S/N: ZAP1-UP)
3516C (S/N: SBK1-UP)
Engine:
3516 (S/N: YAL1-UP; ZAL1-UP; ZBL1-UP; GZR1-UP; YAS1-UP; YBS1-UP; 25Z1-UP)
3516B (S/N: JDE1-UP; 7RN1-UP; YAP1-UP; ZBP1-UP; PBR1-UP; PDR1-UP; YAR1-UP; YBR1-UP; ZAR1-UP; ZBR1-UP; YAT1-UP; YBT1-UP; YAW1-UP; YBW1-UP; JCY1-UP)
3516C (S/N: JDJ1-UP; SBJ1-UP; SFJ1-UP; SBM1-UP)
Power Module:
PM3516 (S/N: NAM1-UP; KEN1-UP; NBR1-UP)
Engine News SEBD9803, 21 August 2012, "Kits Are Available for Repair of Exhaust Components on Certain 3516 Electric Power Engines with Center-Mounted Exhaust Systems". The article was revised to remove a serial number and a sales model. None of the information below has changed.The kits will help to improve the sealing of the exhaust systems.Use of the kits requires replacement of the couplings, the bellows, and the exhaust elbows.Two kits are available, depending on the elbow coupling.The part numbers of the kits and the parts in the kits are listed in Tables 1 and 2.
Table 1
386-9621 Engine Parts Kit for 3516 Engines with the 127-4415 Elbow Coupling    
Qty     Part    
8     1A-2029 Bolt    
8     2N-2765 High Temperature Bolt    
8     2N-2766 Locknut    
4     3J-5389 Plug    
8     5M-2894 Hard Washer    
8     6V-1943 High Temperature Bolt    
4     214-6050 Clamp    
2     236-1161 Elbow    
4     236-1637 Seal    
4     236-1655 Exhaust Manifold Gasket    
4     236-4309 Bellows As    
4     306-1720 Band Clamp    
Table 2
384-0499 Engine Parts Kit for 3516 Engines with the 245-4409 Elbow Coupling    
Qty     Part    
8     2N-2765 High Temperature Bolt    
8     2N-2766 Locknut    
4     3J-5389 Plug    
8     5M-2894 Hard Washer    
8     6V-1943 High Temperature Bolt    
4     214-6050 Clamp    
16     216-2211 Clamp    
2     236-1161 Elbow    
4     236-1637 Seal    
4     236-1655 Exhaust Manifold Gasket    
4     262-1623 Bellows As    
4     268-4743 Hose    
4     306-1720 Band Clamp    Locations of the New Parts
Illustration 1 g03193676
(1) 214-6050 Clamp (2) 236-4309 Bellows As or 262-1623 Bellows As (3) 306-1720 Band Clamp (1 and 3) 214-6050 Clamp and 306-1720 Band Clamp Lubricate the threads, the bearing surfaces, and the inside diameter of the clamps with Loctite C5A Copper Anti-Seize. Tighten the clamps ... 20 5 N m (15 4 lb ft) Tap lightly around the circumference of the clamps with a soft hammer. Tighten the clamps again. ... 20 5 N m (15 4 lb ft)
Illustration 2 g03193698
(4) 236-1161 Elbow (5) 3J-5389 Plug (6) 6V-1943 High Temperature Bolt (7) 5M-2894 Hard Washer Lubricate the threads of bolt (6) with Loctite C5A Copper Anti-Seize.
Illustration 3 g03193700
(2) 236-4309 Bellows As or 262-1623 Bellows As (4) 236-1161 Elbow (8) 236-1655 Exhaust Manifold Gasket (9) 236-1637 Seal Place gasket (8) in bellows (2) on the turbocharger side.Place seal (9) in bellows (2) on the side of elbow (4).
Illustration 4 g03194137
(10) 2N-2765 High Temperature Bolt (11) 2N-2766 Locknut Note: The parts in Illustration 5 are only in the 386-9621 Engine Parts Kit
Illustration 5 g03194177
(12) 1A-2029 Bolt Note: In Illustration 6, clamp (13)