6B9186 GASKET Caterpillar parts
613, 613B, 814, 815, 816, 916, 920, 936, 936F, 950, 950B, 950F, 950F II, 955C, 966C, 966D, 966F, 966F II, 970F, 980, 980B, CB-14, CB-214D, CB-214E, CB-22, CB-224C, CB-334D, CB-334E, CB-335D, CB-34, CV...
Rating:
Alternative (cross code) number:
CA6B9186
6B-9186
6B9186
CA6B9186
6B-9186
6B9186
Weight: 0.01 pounds 0 kg.
Information:
ID
22.631
mm
MATERIAL THICKNESS
2.304
mm
OD
28.575
mm
GAS ENGINE, WHEEL TRACTOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$10.58
19 Oct 2023
US: FinditParts Inc
6B9186 - WASHER--CONTACTOR TO TACHOMETER DRIVE HOUSING fits Caterpillar (CAT)
BLUMAQ 6B9186 - WASHER--CONTACTOR TO TACHOMETER DRIVE HOUSING fits Caterpillar (CAT)
BLUMAQ 6B9186 - WASHER--CONTACTOR TO TACHOMETER DRIVE HOUSING fits Caterpillar (CAT)
$8.16
21 Jan 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
CATERPILLAR GASKET 6B9186 NEW
$9.53
25 May 2022
0.1102[0.05] Pounds
US: ProperBuy
6B9186 Gasket Fits Caterpillar
TCP Warranty
TCP Warranty
Number on catalog scheme:
8
For full view, you need register
Compatible equipment models: 6B9186:
Information:
Removal Procedure
Start By:
Remove the mounting bracket for the Electronic Control Module (ECM) . Refer to Disassembly and Assembly, "ECM Mounting Bracket- Remove and Install" for the correct procedure.
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Drain" for the correct procedure.
Illustration 1 g03408818
If the engine has a left-hand side oil filter (1), remove the oil filter base. Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install" for the correct procedure.
If the engine has a right-hand side oil filter, follow Step 3.a through Step 3.c in order to remove blanking plate (2).
Remove bolts (4).
Remove blanking plate (2).
Remove gasket (3) (not shown).
Illustration 2 g03408819
Do not remove the bolts from Position (A).
Remove bolts (6) from engine oil cooler (5). Support the engine oil cooler as the bolts are removed. Note: The bolts are different lengths. Note the position of the different bolts.
Remove engine oil cooler assembly (5) from the cylinder block.
Remove gasket (7) (not shown).
Illustration 3 g03408820
If necessary, follow Step 8.a through Step 8.c in order to disassembly engine oil cooler (5).
Remove bolts (8) from engine oil cooler assembly (5).
Remove engine oil cooler matrix (9) from spacer plate (11).
Remove gasket (10).
Start By:
Remove the mounting bracket for the Electronic Control Module (ECM) . Refer to Disassembly and Assembly, "ECM Mounting Bracket- Remove and Install" for the correct procedure.
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Drain the coolant from the cooling system into a suitable container. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Drain" for the correct procedure.
Illustration 1 g03408818
If the engine has a left-hand side oil filter (1), remove the oil filter base. Refer to Disassembly and Assembly, "Oil Filter Base - Remove and Install" for the correct procedure.
If the engine has a right-hand side oil filter, follow Step 3.a through Step 3.c in order to remove blanking plate (2).
Remove bolts (4).
Remove blanking plate (2).
Remove gasket (3) (not shown).
Illustration 2 g03408819
Do not remove the bolts from Position (A).
Remove bolts (6) from engine oil cooler (5). Support the engine oil cooler as the bolts are removed. Note: The bolts are different lengths. Note the position of the different bolts.
Remove engine oil cooler assembly (5) from the cylinder block.
Remove gasket (7) (not shown).
Illustration 3 g03408820
If necessary, follow Step 8.a through Step 8.c in order to disassembly engine oil cooler (5).
Remove bolts (8) from engine oil cooler assembly (5).
Remove engine oil cooler matrix (9) from spacer plate (11).
Remove gasket (10).
Cat SIS web machinery list:
Parts gasket Caterpillar catalog:
950F, 950F II, 960F
814, 815, 950, 966C
814, 815, 950, 966C, 966R
814, 815, 950, 966C, 966R, 980, 980B
814, 815, 950, 966C, 966R, 980, 980B
950, 966C, 966R, 988
815, 950, 966C, 966R
950
980, 980B
980
950, 966C, 988
814, 815, 966C, 966R
16, 1693, 631C, 657, 657B, 666, 768B, 769, 824B, 825B, 826B, 834, 983, 988, D343, G343
16, 1693, 631C, 657, 657B, 769, 824, 824B, 825B, 834, 983, 988, D343, G343
120B, 1674, 1693, 3516, 583H, 630B, 631C, 657B, 768B, 769, 824B, 834, 930R, 983, C-9, C9, CX31-C9I, D326F, D337F, D342, D342C, D343, D4E SR, D5B, D6D, D8H, D8K, G342C, TH31-E61
955C, 977D, D315, D337, D342, D342C, D343, D353C, D9E, D9G, D9H, G343, G353D
631C, 633C, 657, 657B, 769, 824, 824B, 834, 983, 988, D343, G343
4M9117
GASKET
16, 1693, 657, 769, 824, 824B, 834, 988, D343
16, 1693, 657, 769, 824, 824B, 834, 988, D343
16, 1693, 631C, 657B, 824B, 983, D343
1693, 631C, 657B, 769, 824B, 983, D343
1693, 631C, 657B, 769, 824B, 983, D343, D8H, D8K
1693, 631C, 641B, 650B, 657B, 666B, 769, 772, 773, 824B, 983, 992, D343, D8H, D8K
16, 1693, 631C, 657, 657B, 666, 768B, 769, 824B, 825B, 826B, 834, 983, D343, G343
16, 1693, 631C, 657, 657B, 666, 768B, 769, 824B, 825B, 826B, 834, 983, 988, D343, D9H, G343