GASKET 6I3034 - Caterpillar

There may be several specific safety messages on your engine. The exact location and a description of the safety messages are reviewed in this section. Become familiar with all of the safety messages.Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap for cleaning the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off the engine.Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Cat dealer can provide new safety messages.
Illustration 1 g03339811
View of the right side of a C32 Marine Generator Set
Illustration 2 g03339815
View of the left side of a C32 Marine Generator Set
Universal Warning (1)
Illustration 3 g01370904One safety message is located on the valve cover base towards the front of each side of the engine. A universal warning is located on each side of the terminal box.
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Cat dealer for replacement manuals. Proper care is your responsibility.
Hot Surface (2)One message is located on each side of the barrel of the generator.
Illustration 4 g01384734
Hot parts or hot components can cause burns or personal injury. Do not allow hot parts or components to contact your skin. Use protective clothing or protective equipment to protect your skin.
Hot Fluid Under Pressure (3)
Illustration 5 g01371640One safety message is located on the top of each expansion tank.
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Electrical Shock (4)The safety message for electrical shock is located on the sides of the terminal box and the rear of the terminal box.
Illustration 6 g01372247
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings