GASKET 6L1694 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 4
B 138-7574 Link Bracket 2
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Shut off the gas supply.
Drain the cooling system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Drain the auxiliary cooling system. Refer to Operation and Maintenance Manual, "Refill Capacities and Recommendations".
Illustration 1 g00993587
Remove bolts (1) in order to disconnect throttle assembly (3) and the gasket from cover (2).
Illustration 2 g00993588
Remove tube assemblies (5) from aftercooler (4).
Remove tube assemblies (6) from aftercooler (7).
Illustration 3 g00993589
Attach Tooling (A) to cover (2) and a suitable lifting device.
Remove bolts (8).
Remove cover (2), aftercooler (4), aftercooler (7), and the O-ring seal. The weight of cover (2), aftercooler (4), and aftercooler (7) is approximately 590 kg (1300 lb).
Illustration 4 g00993591
Remove bolts (9) in order to remove cover (2), aftercooler (4), and the O-ring seal from aftercooler (7). The weight of cover (2) and aftercooler (4) is approximately 340 kg (750 lb).
Remove Tooling (A).
Illustration 5 g00993592
Install Tooling (B) and a suitable lifting device to cover (2).
Remove bolts (10) in order to remove cover (2) from aftercooler (4).
Remove cover (2) and the O-ring seal. The weight of the cover is approximately 91 kg (200 lb).