GASKET-FRONT ACCESSORY DRIVE 6L2069 - Caterpillar

The System Control Screen allows the operator to set the System Mode, parameters and functions. Generator No Load tests may be activated. If the system is an XLM, then a Utility Fail Test may be activated and performed.
Illustration 1 g02520864
System control screen (1) Master mode selector switch (2) Utility retransfer selector switch (3) Transfer selector switch (4) Generator no load test (5) Utility fail test selector switch (6) Peaking mode selector switch (7) System baseload setpoint (8) Utility import limit (9) Utility export limit (10) Timer bypassMaster Mode Selector Switch (1) - A two position selector switch which allows the system to be switched from "Manual" mode to "Auto" mode. Touch the "Manual" or "Auto" to perform the switching.Manual, Auto, Xfer to Emergency (not provided in EGP) and Load Manage (not provided in EGP)Utility Retransfer Selector Switch (2) - Selects "Retransfer" mode to the "Utility", "Manual - Auto" (not provided in EGP)Transfer Selector Switch (3) - Determines the retransfer "Mode", "Open - Closed" (not provided in EGP)Generator No Load Test (4) - Enable the generators operation to be tested without the ATSs transferring to the generator bus. Touching the switch lever will toggle the switch. (not provided in EGP)Utility Fail Test selector switch (5) - Simulates a failed utility (not provided in EGP)Peaking Mode Selector Switch (6) - Selects the Peaking mode (not provided in EGP) Util track Import, Util Track export, Baseload Import and Base LoadSystem Baseload Setpoint (7) - The kW level set point that the entire generator plant assumes level. (not provided in EGP)Util Import Limit (8) - Sets the utility kW import level (not provided in EGP)Util Export Limit (9) - Sets the utility kW export level (not provided in EGP)Timer Bypass (10) - Allows operator to "bypass" the default 30 minute warm-up timer prior to paralleling with Utility. The timer ensures a stable utility source.