GASKET 6L2732 - Caterpillar

Illustration 1 g03061837
Table 1
Specification for 240-6652 Cylinder Block Gp , 383-2090 Cylinder Block Gp (1), and 383-7226 Cylinder Block Gp    
Item    Qty    Part    Specification Description    
The camshaft bearings from the front surface of the cylinder block are the following dimensions:    
The oil holes must be aligned at the correct angle when the bearings are installed. Refer to Specifications, "Cylinder Block" for the correct angle.    
A     -     -     Distance from front face of cylinder block is 2200.0 1.5 mm (86.61 0.06 inch).    
B     -     -     Distance from front face of cylinder block is
1930.0 1.5 mm (75.98 0.06 inch).    
C     -     -     Distance from front face of cylinder block is
1660.0 1.5 mm (65.35 0.06 inch).    
D     -     -     Distance from front face of cylinder block is
1390.0 1.5 mm (54.72 0.06 inch).    
E     -     -     Distance from front face of cylinder block is
1120.0 1.5 mm (44.09 0.06 inch).    
F     -     -     Distance from front face of cylinder block is
850.0 1.5 mm (33.46 0.06 inch).    
G     -     -     Distance from front face of cylinder block is
580.0 1.5 mm (22.83 0.06 inch).    
H     -     -     Distance from front face of cylinder block is
310.0 1.5 mm (12.20 0.06 inch).    
J     -     -     Distance from front face of cylinder block is
40.0 1.5 mm (1.58 0.06 inch).    
( 1 ) Callout (A) and callout (B) not applicable for 12 cylinder engine.