GASKET 6N1330 - Caterpillar

Illustration 42 g03855597
View of the changes to the 332-6774 Final Drive and Brake Wheel Ar
Illustration 43 g03840390
Go to the top, left side of the left rear wheel assemblies. Remove bolt (B), washer (C), Clip (D), clip (E), grommet (F), clip (G), and clip (H) from hose assembly (A) and tube assembly (Z). Save the parts.
Remove bolt (U), washer (V), clip (W), clip (X), and grommet (Y) from hose assembly (A). Save the parts.
Remove hose assembly (A). Discard the hose assembly.
Remove bolts (R), washers (S), and half flanges (T) from tube assembly (Z). Save the parts.
Remove bolts (J), washers (K), nut (L), clip (M), clip (N), and plate (P) from tube assembly (Z). Save the parts.
Remove bolts (AA), and washers (AB) from tube assembly (Z). Remove the tube assembly from the machine. Discard the tube assembly. Save the fasteners.
Illustration 44 g03840394
Go to the front of the left rear wheel assemblies. Remove the two hose assemblies (AC). Discard the parts.
Remove bolts (AD), and washers (AE) from tube assembly (AF). Save the fasteners.
Remove bolts (AG), and washers (AH) from the clips (AJ) on tube assembly (AF). Remove the clips, bracket assembly (AK), and plate (AL). Save all of the parts.
Remove tube assembly (AF) from the machine. Discard the tube assembly.
Illustration 45 g03842017
Go to the top of the back, right side of the rear wheel assemblies. Remove bolts (AM), washers (AN), nut (AP), clip (AR), clip (AS), and plate (AT) from tube assembly (AU). Save the parts.
Remove bolt (AW), washers (AX), nut (AY), clip (AZ), clip (BA), grommet (BB), clip (BC), and clip (BD) from tube assembly (AU), and hose assembly (AV). Save the fasteners.
Remove bolts (BE), and washers (BF) from tube assembly (AU). Save the fasteners.
Remove bolt (BK), washer (BL), clip (BG), clip (BH), and grommet (BJ) from hose assembly (AV). Save the parts.
Remove hose assembly (AV). Discard the part.
Remove bolt (BM), and washers (BN) from tube assembly (AU). Save the fasteners.
Remove tube assembly (AU). Discard the part.
Illustration 46 g03842059
Go to the top, front, side of the right rear wheel assembly. Remove clipping (BS) from hose assembly (BP), hose assembly (BR), and tube assembly (BY). Discard the parts.
Remove hose assembly (BP), and hose assembly (BR). Discard the parts.
Remove bolts (BT), and washers (BU), clips (BV), bracket assembly (BW), and plate (BX) from tube assembly (BY). Save the parts.
Remove bolts (BZ), and washers (CA) from tube assembly (BY). Save the parts.
Remove tube assembly (BY). Discard the part.
Illustration 47 g03842080
Go to the top, left side of the left rear wheel assemblies. Install one O-Ring seal (48) into the end of tube assembly (53) with a 90 degree bend. Install one O-Ring seal (45) into the other end of the tube assembly. Use bolts (AA), and washers (AB) that were