GASKET 6N4956 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 421-5662 Eyebolt Lifting Assembly 4 Start By:
Remove the torque converter. Refer to Disassembly and Assembly, "Torque Converter - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06242572
Remove O-ring seal (1). Remove bolts (2).
Remove flywheel adapter (3).
Illustration 2 g06242733
Disconnect hose assembly (4). Disconnect hose assembly (5).
Illustration 3 g06242748
The weight of torque converter housing (7) is approximately 136 kg (300 lb). Attach tooling (A) and a suitable lifting device to torque converter housing (7). Remove bolts (6).
Remove torque converter housing (7) and place on suitable cribbing.