6N6250 GASKET Caterpillar parts
3304, 3304B, 3306, 3306B, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, C15, C18, C30, C32, C9
Rating:
Alternative (cross code) number:
CA6N6250
6N-6250
6N6250
CA6N6250
6N-6250
6N6250
Weight: 0.01 pounds 0 kg.
GEN SET ENGINE, MARINE ENGINE,
Compatible equipment models: 6N6250:
Information:
Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Remove the front fixed axle. Refer to Disassembly and Assembly, "Fixed Axle (Front) - Remove and Install".
Remove the rear axle. Refer to Disassembly and Assembly, "Oscillating Axle (Rear) - Remove and Install".
Illustration 1 g00337018
Typical ExampleNote: Make sure that the intermediate housing of the differential is positioned on the top when you locate the axle assembly in Tooling (A) .
Remove the service brake from the intermediate housing. Refer to Disassembly and Assembly, "Service Brakes - Remove and Install".
Illustration 2 g00337019
Fasten a suitable lifting device to intermediate housing (1). Remove bolts (2) and intermediate housing assembly (1). The weight of intermediate housing (1) is approximately 109 kg (240 lb).
Illustration 3 g00337020
Illustration 4 g00337021
Remove bolt (3) and bolt lock (4) .Note: Adjusting nuts of two different sizes are used in the bevel gear group. Use Tooling (F) or Tooling (G) to remove the adjusting nuts.
Use Tooling (F) or Tooling (G) to remove the adjusting nut (5) .
Remove locating pin (7), sleeve assembly (6), and bearing cup (8) from intermediate housing (1) .
Illustration 5 g03694715
Remove two bolts (9) that are directly opposite each other. Install Tooling (J) in the bolt holes.
Illustration 6 g03694726
Remove remaining bolts (9) .
Use the suitable lifting device to remove pinion gear assembly (10). The weight of pinion gear assembly (10) is approximately 66 kg (145 lb).
Remove the shims and the O-ring seal from the pinion assembly.
Illustration 7 g00976419
Install Tooling (C) on differential assembly (11). Attach a suitable lifting device to Tooling (C) .
Use a suitable lifting device to remove differential assembly (11). The weight of differential assembly (11) is 109 kg (240 lb).
Illustration 8 g00976397
Use Tooling (D) to remove bearing cone (12) .
Illustration 9 g00976399
Turn the differential onto the opposite side. Use Tooling (E) to remove bearing cone (13) .
Remove bolts (15) that hold bevel gear (16) in position. Use a press to remove bevel gear (16) from the differential.
Remove two spring pins (14) from the bevel gear.
Illustration 10 g00981122
Remove bolt lock (18) and bolt (17) .
Remove adjusting nut (19) from the differential housing.
Remove locating pin (20) and remove sleeve assembly (21). Remove bearing cup (22) .
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Remove the front fixed axle. Refer to Disassembly and Assembly, "Fixed Axle (Front) - Remove and Install".
Remove the rear axle. Refer to Disassembly and Assembly, "Oscillating Axle (Rear) - Remove and Install".
Illustration 1 g00337018
Typical ExampleNote: Make sure that the intermediate housing of the differential is positioned on the top when you locate the axle assembly in Tooling (A) .
Remove the service brake from the intermediate housing. Refer to Disassembly and Assembly, "Service Brakes - Remove and Install".
Illustration 2 g00337019
Fasten a suitable lifting device to intermediate housing (1). Remove bolts (2) and intermediate housing assembly (1). The weight of intermediate housing (1) is approximately 109 kg (240 lb).
Illustration 3 g00337020
Illustration 4 g00337021
Remove bolt (3) and bolt lock (4) .Note: Adjusting nuts of two different sizes are used in the bevel gear group. Use Tooling (F) or Tooling (G) to remove the adjusting nuts.
Use Tooling (F) or Tooling (G) to remove the adjusting nut (5) .
Remove locating pin (7), sleeve assembly (6), and bearing cup (8) from intermediate housing (1) .
Illustration 5 g03694715
Remove two bolts (9) that are directly opposite each other. Install Tooling (J) in the bolt holes.
Illustration 6 g03694726
Remove remaining bolts (9) .
Use the suitable lifting device to remove pinion gear assembly (10). The weight of pinion gear assembly (10) is approximately 66 kg (145 lb).
Remove the shims and the O-ring seal from the pinion assembly.
Illustration 7 g00976419
Install Tooling (C) on differential assembly (11). Attach a suitable lifting device to Tooling (C) .
Use a suitable lifting device to remove differential assembly (11). The weight of differential assembly (11) is 109 kg (240 lb).
Illustration 8 g00976397
Use Tooling (D) to remove bearing cone (12) .
Illustration 9 g00976399
Turn the differential onto the opposite side. Use Tooling (E) to remove bearing cone (13) .
Remove bolts (15) that hold bevel gear (16) in position. Use a press to remove bevel gear (16) from the differential.
Remove two spring pins (14) from the bevel gear.
Illustration 10 g00981122
Remove bolt lock (18) and bolt (17) .
Remove adjusting nut (19) from the differential housing.
Remove locating pin (20) and remove sleeve assembly (21). Remove bearing cup (22) .
Cat SIS web machinery list:
Parts gasket Caterpillar catalog:
4N2695
GASKET
16G, 16H NA, 245, 245B, 3306, 3406B, 375, 375 L, 5080, 578, 583R, 587R, 621, 621B, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, 824C, 824G, 825G, 826C, 826G, 980C, 980F, 980G, 983B, D8N, D8R, D8R I...
16G, 16H NA, 245, 245B, 3306, 3406B, 375, 375 L, 5080, 578, 583R, 587R, 621, 621B, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, 824C, 824G, 825G, 826C, 826G, 980C, 980F, 980G, 983B, D8N, D8R, D8R I...
8N2431
GASKET-MANIFOLD
3408, 3412, 637D, 769C, 773B, 988B
3408, 3412, 637D, 769C, 773B, 988B
6N5876
GASKET-FRONT COVER
3114, 3116, 3126, 3208, 3408, 3408C, 3412, 3412C, 613C, 916, PM-565, PM-565B, PR-1000, PS-500
3114, 3116, 3126, 3208, 3408, 3408C, 3412, 3412C, 613C, 916, PM-565, PM-565B, PR-1000, PS-500
5H7847
GASKET
3176B, 3408, 3412, 3412C, 3412E, 621F, 621G, 623G, 627G, C27, C32, D6E, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, R1300, R1300G, TH48-E70
3176B, 3408, 3412, 3412C, 3412E, 621F, 621G, 623G, 627G, C27, C32, D6E, D6F SR, D6G, D6G SR, D6G2 LGP, D6G2 XL, R1300, R1300G, TH48-E70
7C6172
GASKET-CYLINDER HEAD
3176, 3176B, 3176C, 3196, 3406B, 3406C, 3406E, 3456, C-10, C-12, C-15, C-16
3176, 3176B, 3176C, 3196, 3406B, 3406C, 3406E, 3456, C-10, C-12, C-15, C-16
7C6173
GASKET-CYLINDER BLOCK
3176, 3176B, 3176C, 3196, 3406B, 3406C, 3406E, 3456, C-10, C-12, C-15, C-16
3176, 3176B, 3176C, 3196, 3406B, 3406C, 3406E, 3456, C-10, C-12, C-15, C-16
7C6174
GASKET
3176, 3176B, 3176C, 3196, 3406B, 3406C, 3406E, 3456, C-10, C-12, C-15, C-16
3176, 3176B, 3176C, 3196, 3406B, 3406C, 3406E, 3456, C-10, C-12, C-15, C-16
9M4791
GASKET-END COVER
1140, 1673, 1673B, 3176, 3176B, 3176C, 3196, 3208, 3406B, 3406C, 3406E, 3456, 651, C-10, C-12, C-15, C-16
1140, 1673, 1673B, 3176, 3176B, 3176C, 3196, 3208, 3406B, 3406C, 3406E, 3456, 651, C-10, C-12, C-15, C-16
1W5908
GASKET
16G, 16H NA, 3406B, 621F, 623E, 627F, 824C, 824G, 825G, 826C, 826G, 980C, 980F, 980G, D8R
16G, 16H NA, 3406B, 621F, 623E, 627F, 824C, 824G, 825G, 826C, 826G, 980C, 980F, 980G, D8R
4N4725
GASKET
16H NA, 245, 245B, 3406B, 375, 375 L, 5080, 621, 621B, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, 824G, 825G, 826G, 980C, 980F, 980G, 983B
16H NA, 245, 245B, 3406B, 375, 375 L, 5080, 621, 621B, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 814B, 824G, 825G, 826G, 980C, 980F, 980G, 983B
4N1724
GASKET
3408, 3412, 637D, 988B
3408, 3412, 637D, 988B
4N4502
GASKET
3412
3412
6L3528
GASKET
3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3512, C-10, CG137-12, D320A, D343, D348, D349, D379, D399, G3304, G3306, G3406, G3408, G3408B, G3408C, G3412, G3412C, G342C, G34...
3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3512, C-10, CG137-12, D320A, D343, D348, D349, D379, D399, G3304, G3306, G3406, G3408, G3408B, G3408C, G3412, G3412C, G342C, G34...
4N1104
GASKET
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 651E, 657E, 769C, 771C, 772B, 773B, 775B, 834B, 836, 988B, 988F, 990, 992C, 992D, C-10, D10N, D8L, D9L, D9N, D9R, PM-565, PM3412, PR-1000...
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 651E, 657E, 769C, 771C, 772B, 773B, 775B, 834B, 836, 988B, 988F, 990, 992C, 992D, C-10, D10N, D8L, D9L, D9N, D9R, PM-565, PM3412, PR-1000...
4N1636
GASKET
3408, 3408B, 3408C, 3412, 3412C, 637D, 657E, 988B, C-10, PM3412
3408, 3408B, 3408C, 3412, 3412C, 637D, 657E, 988B, C-10, PM3412
8S5388
GASKET
245, 3406, 3408, 3408B, 3408C, 3412, 3412C, 627, 637D, 651E, 657B, 657E, 769C, 772B, 988B, 992C, C-10, D6C, D9L, PM3412
245, 3406, 3408, 3408B, 3408C, 3412, 3412C, 627, 637D, 651E, 657B, 657E, 769C, 772B, 988B, 992C, C-10, D6C, D9L, PM3412
4N1868
GASKET
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 651E, 657E, 769C, 771C, 772B, 773B, 775B, 834B, 836, 988B, 988F, 990, 992C, 992D, C-10, D10N, D8L, D9L, D9N, D9R, PM-565, PM3412, PR-1000...
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 651E, 657E, 769C, 771C, 772B, 773B, 775B, 834B, 836, 988B, 988F, 990, 992C, 992D, C-10, D10N, D8L, D9L, D9N, D9R, PM-565, PM3412, PR-1000...
1244668
GASKET-FUEL RATIO CONTROL
3406, 3408, 3408C, 3412, 3412C, 3412D, 589, 631E, 637E, 651E, 657E, 769C, 771C, 773B, 775B, 834B, 988B, 988F, 990, 992C, 992D, D10N, D9R
3406, 3408, 3408C, 3412, 3412C, 3412D, 589, 631E, 637E, 651E, 657E, 769C, 771C, 773B, 775B, 834B, 988B, 988F, 990, 992C, 992D, D10N, D9R
2F2293
GASKET-COVER
3304, 3306, 3406, 3406B, 3408, 3408B, 3412, G3306, G3406, G3408, G3412, G342C
3304, 3306, 3406, 3406B, 3408, 3408B, 3412, G3306, G3406, G3408, G3412, G342C
6L1597
GASKET
1673, 1673B, 1676, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3412, 3412C, 589, 621, 637D, 637E, 651E, 657E, 772B, 773B, 834B, 980, 980C, 988B, 992, 992C, D10N, D320A, D330A, D3...
1673, 1673B, 1676, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3412, 3412C, 589, 621, 637D, 637E, 651E, 657E, 772B, 773B, 834B, 980, 980C, 988B, 992, 992C, D10N, D320A, D330A, D3...
5L8991
GASKET-COVER
16, 1673, 1673B, 1673C, 1674, 1676, 1693, 16G, 215, 245, 3304, 3306, 3406, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 621, 621B, 621R, 623, 627, 631C, 631E, 637D, 637E, 641B, 650B, 651E, 657B, 657E,...
16, 1673, 1673B, 1673C, 1674, 1676, 1693, 16G, 215, 245, 3304, 3306, 3406, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 621, 621B, 621R, 623, 627, 631C, 631E, 637D, 637E, 641B, 650B, 651E, 657B, 657E,...
4N1870
GASKET-HOUSING
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 651E, 657E, 769C, 771C, 772B, 773B, 775B, 834B, 988B, 988F, 990, 992C, 992D, D10N, D8L, D9L, D9N, D9R, PM-565, PR-1000, PR-450C, PR-750B
3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 651E, 657E, 769C, 771C, 772B, 773B, 775B, 834B, 988B, 988F, 990, 992C, 992D, D10N, D8L, D9L, D9N, D9R, PM-565, PR-1000, PR-450C, PR-750B
2P8697
GASKET
16, 1693, 16G, 245, 3406, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 621, 621B, 631C, 631E, 637D, 637E, 641B, 651E, 657B, 657E, 768B, 769C, 771C, 772, 772B, 773B, 775B, 777, 824B, 824C, 826C, 834B, ...
16, 1693, 16G, 245, 3406, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 621, 621B, 631C, 631E, 637D, 637E, 641B, 651E, 657B, 657E, 768B, 769C, 771C, 772, 772B, 773B, 775B, 777, 824B, 824C, 826C, 834B, ...
2P8669
GASKET
1693, 245, 3406, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 651E, 657B, 657E, 769C, 771C, 772B, 773B, 775B, 777, 834B, 980C, 988B, 988F, 990, 992, 992C, 992D, D10, D10N, D343, D348...
1693, 245, 3406, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 589, 631E, 637D, 637E, 651E, 657B, 657E, 769C, 771C, 772B, 773B, 775B, 777, 834B, 980C, 988B, 988F, 990, 992, 992C, 992D, D10, D10N, D343, D348...