GASKET 6N9339 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Drain the coolant. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining and filling procedures.
Illustration 1 g03857073
Disconnect coupling assemblies (2), coupling assemblies (3), and tube assemblies (1).
Illustration 2 g03857099
Remove bolt (5) and clips (8).
Remove bolts (6) and coupling assemblies (4). Disconnect tube assemblies (7).
Illustration 3 g03857163
Remove coupling assembly (11), coupling assembly (10), and tube assembly (9).
Illustration 4 g03857181
Remove bolts (12), bolts (13), guard assembly (14), and guard assembly (15).
Illustration 5 g03857191
Remove bolts (16).
Illustration 6 g03857202
Remove nuts (17).
Illustration 7 g03857214
Remove bolts (18).
Illustration 8 g03857228
Remove nuts (19).
Illustration 9 g03857234
Attach a suitable lifting device to remove radiator group (20). The weight of radiator group (20) is approximately 1719 kg (3790 lb). Installation Procedure
Install radiator group (20) in the reverse order of removal.