GASKET KT 6V3708 - Caterpillar

Removal Procedure
Illustration 1 g00709885
Remove two bolts (4), the nuts, and the hard washers that hold two clips (6) in position.
Loosen two fittings (2) and disconnect two air tubes (3). Remove two bolts (1), the nuts, and the hard washers that hold two service indicators (5) in position. Remove the service indicators and the bracket from the air cleaner.
Illustration 2 g00709886
Loosen four clamps (7) .
Illustration 3 g00709887
Position a suitable lifting sling around the air cleaner, as shown. Secure the lifting sling to a suitable hoist. Remove four bolts (8) and the hard washers that hold the air cleaner in position. Remove the air cleaner from the machine. The weight of the air cleaner is 41 kg (90 lb).
Repeat Step 4 for the remaining air cleaner.
Illustration 4 g00709888
Remove the following components from air cleaner (9) : cup assembly (15), lower clamp (14), seal (13), body assembly (12), upper clamp (11) and seal (10) .
Illustration 5 g00709889
Remove cover assembly (18), primary element (17), and secondary element (16) from air cleaner (9) .Installation Procedure
Note: Check all of the seals and the components for wear or for damage. Replace the components, if necessary. Clean all of the components with a cloth that is free of loose material (lint).
Illustration 6 g00709889
Install secondary element (16), primary element (17), and cover assembly (18) in air cleaner (9) .
Illustration 7 g00709888
Install the following components in air cleaner (9) : seal (10), upper clamp (11), body assembly (12), seal (13), lower clamp (14) and cup assembly (15) .
Illustration 8 g00709887
Position a suitable lifting sling around the air cleaner. Secure the lifting sling to a suitable hoist. Lift the air cleaner into position on the machine, as shown. The weight of the air cleaner is 41 kg (90 lb). Install four bolts (8) and the hard washers that hold the air cleaner in position.
Repeat Step 3 for the remaining air cleaner.
Illustration 9 g00709886
Tighten four clamps (7) .
Illustration 10 g00709885
Position two service indicators (5) and the bracket on the air cleaner. Install two bolts (1), the nuts, and the hard washers that hold the service indicators to the air cleaner. Connect two air tubes (3) and tighten two fittings (2) .
Install two bolts (4), the nuts, and the hard washers that hold two clips (6) in position.